Pneumax - Hauptkatalog Page 839
Commercial customer offer**Top sellers from Pneumax GmbH
Cylinders according to standard ISO 15552 Series 1348 - 1349 - 1350, Non rotating cylinders Series 1348-1349-1350, Non rotating cylinders Construction characteristics End caps UNI 5079 aluminium alloy casting painted black by cataphoresis Rod C43 chromed steel Ra = 0.2 Barrel UNI 9006/1 aluminium alloy square section, hardened 30 micron oxidate Cushion bushings 2011 UNI 9002/5 hardened alloy aluminium Piston polyacetal resin, self-lubricated and anti-wear, with plastoferrite rings in magnetic version Piston seals NBR oil-resistant rubber, PUR Piston rod and cushion seals Cushioning adjustement screw brass Technical characteristics Fluid Filtered air. No lubrication needed, if applied it shall be continuous. Pressure 10 bar Operating temperature -5°C - +70°C Please note: air must be dried for applications with lower temperature. Use hydraulic oils H class (ISO VG32) for correct continued lubrication. Our Technical Department will be glad to help. Bore Usable surface (square profile) cm² Max couple on the rod (max torque) Nm Grade precision (rest rod, without load) anti-rotation Cushion length mm. 32 8.31 0.5 12' 22 40 12.41 0.8 12' 27 50 18.41 1.1 12' 27 63 29.67 1.5 12' 32 Stroke Tolerance (ISO 15552) Standard strokes (for all diameters) from 0 to 150, every 25 mm Other stroke for these following bores: Ø 32 Ø 40 Ø 50 Ø 63 Bore 32 - 40 - 50 - 63 Stroke Tolerance up to 500 +2 0 80 mm 80 - 160 mm 80 - 160 - 200 - 250 mm 80 - 160 - 200 - 300 - 320 mm On request are available strokes up to 1000 mm Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 3 | 43 Pneumatic actuatiOn 3 Please follow the suggestions below to ensure a long life for these cylinders: •use clean and lubricated air •correct alignment during assembly with regard to the applied load so as to avoid radial components or bending the rod. •avoid high speeds together with long strokes and heavy loads: this would produce kinetic energy which the cylinder cannot absorb, especially if used as a limit stop (in this case use mechanical stop device) •evaluate the environmental characteristics of cylinder used (high temperature, hard atmosphere, dust, humidity etc.)
1106 Pages | Valid until 06/2025 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.