Pneumax - Hauptkatalog Page 381
Commercial customer offer**Top sellers from Pneumax GmbH
Accessories - Function fittings Series 55 Tecno-FUN ► In line progressive start-up valve Coding: A B SEE CONNECTIONS LIST COnnECtiOn b SEE CONNECTIONS LIST CONNECTIONS LIST 1.8 13.5 551.181.A.B.XX COnnECtiOn A 00 = None D4 = Straight Ø4 D6 = Straight Ø6 D8 = Straight Ø8 3.2 L1 = Female banjo G1/8" G8 = Rotating banjo Ø 8 B A M1 = G1/8" male M2 = G1/4" male F1 = G1/8" female 18 30 15 Example: 551.181.D6.D4.XX In line progressive start-up valve. Connections "A" Tube Ø6, "B" Tube Ø4 nOtE : For the dimension including cartridges see page Accessories - Function fittings Construction characteristics - the soft start valve is a device designed to gradually pressurise the downstream circuit until 50% of the upstream pressure value is reached. - Once the 50% of the upstream pressure value is reached in the down stream circuit the valve fully opens allowing full air passage. - the filling time can be adjusted thanks to the built in flow regulator. - this device is used in order to ensure that during the pneumatic circuit start up the cylinders will return to theirs home position slowly avoiding collisions or sudden movements. technical characteristics Filtered air. no lubrication needed, if applied it shall be continuous Fluid See CONNECTIONS LIST Working ports size Opening pressure (Pa) 50% of the inlet pressure (Pi) Flow rate at 6 bar with free exhaust (Nl/min) from 1 to 2 with opening ciruit 350 Flow rate at 6 bar with Δp=1 from 1 to 2 with opening ciruit 600 Flow rate at 6 bar with Δp=1 from 2 to 1 with opening pin 650 temperature °C -5 ÷ +50 Weight (g) ► 31 90° progressive start-up valve Coding: A 1.8 13.5 B 551.281.A.B.XX COnnECtiOn A SEE CONNECTIONS LIST COnnECtiOn b SEE CONNECTIONS LIST CONNECTIONS LIST 00 = None D4 = Straight Ø4 3.2 30 18 47.6 D6 = Straight Ø6 B D8 = Straight Ø8 L L1 = Female banjo G1/8" G4 = Rotating banjo Ø 4 G6 = Rotating banjo Ø 6 G8 = Rotating banjo Ø 8 A M1 = G1/8" male M2 = G1/4" male F1 = G1/8" female 15 18.5 25 Example: 551.281.M1.D4.XX 90° progressive start-up valve. connections "A" Male G1/8", "B" Tube Ø4 nOtE : For the dimension including cartridges see page Accessories - Function fittings technical characteristics Construction characteristics - the soft start valve is a device designed to gradually pressurise the downstream Fluid circuit until 50% of the upstream pressure value is reached. Working ports size Once the 50% of the upstream pressure value is reached in the down stream Opening pressure (Pa) circuit the valve fully opens allowing full air passage. the filling time can be adjusted thanks to the built in flow regulator. Flow rate at 6 bar with free exhaust this device is used in order to ensure that during the pneumatic circuit start up (Nl/min) from 1 to 2 with opening the cylinders will return to theirs home position slowly avoiding collisions or ciruit sudden movements. Flow rate at 6 bar with Δp=1 from 1 to 2 with opening ciruit Flow rate at 6 bar with Δp=1 from 2 to 1 with opening pin temperature °C Weight (g) 1 G6 = Rotating banjo Ø 6 Filtered air. no lubrication needed, if applied it shall be continuous See CONNECTIONS LIST 50% of the inlet pressure (Pi) 350 600 650 -5 ÷ +50 31 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 1 | 361 Air distributiOn 25 18.5 42.6 G4 = Rotating banjo Ø 4
1106 Pages | Valid until 06/2025 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.