PFERD Tools Main Catalogue Page 99
Commercial customer offer**Top sellers from PFERD
TC burrs Cutting speeds – burrs for universal applications Recommended rotational speed range [RPM] 2 To determine the recommended cutting speed range [m/min], please proceed as follows: ① Select the material group to be machined. ② Determine the type of application. ③ Select the cut. ④ Establish the cutting speed range. ① Coarse stock removal Steel, Steels up to cast steel 1,200 N/mm² (< 38 HRC) To determine the recommended rotational speed range [RPM], please proceed as follows: ⑤ Select the required burr diameter. ⑥ The cutting speed range and the burr diameter determine the recommended rotational speed range. ② Used for Construction steels, carbon steels, tool steels, Coarse stock removal non-alloyed steels, case-hardened steels, cast steel, tempering steels Fine stock removal Hardened, Tool steels, tempering steels, heat-treated steels over alloyed steels, cast steel 1,200 N/mm² (> 38 HRC) Coarse stock removal Fine stock removal Stainless steel Rust and (INOX) acid-resistant steels Austenitic and ferritic stainless steels Coarse stock removal Fine stock removal Non-ferrous metals Soft non-ferrous metals Aluminium alloys Brass, copper, zinc Coarse stock removal Coarse stock removal Fine stock removal Hard non-ferrous metals Coarse stock removal Bronze, titanium/titanium alloys, hard aluminium alloys (high Si content) Fine stock removal High-temperatureresistant materials Nickel-based and cobalt-based alloys (engine and turbine construction) Coarse stock removal Fine stock removal Cast iron 10 | 2 Grey cast iron, white cast iron Catalogue Cast iron with flake graphite EN-GJL (GG), with nodular graphite/nodular cast iron EN-GJS (GGG), white annealed cast iron EN-GJMW (GTW), black annealed cast iron EN-GJMB (GTS) Coarse stock removal Fine stock removal ③ Cut 1 3 PLUS 3 PLUS HC-FEP 5 5 HC-FEP 3 3 PLUS 4 3 HC-FEP 3 PLUS HC-FEP 4 HC-FEP 5 5 HC-FEP 1 3 3 PLUS 3 HC-FEP 4 4 HC-FEP 5 5 HC-FEP 1 1 3 3 HC-FEP 3 4 3 HC-FEP 4 HC-FEP 5 5 HC-FEP 3 PLUS 4 4 HC-FEP 5 5 HC-FEP 1 3 PLUS 3 ④ Cutting speed 600–900 m/min 450–600 m/min 450–750 m/min 450–600 m/min 450–750 m/min 3 HC-FEP 450–750 m/min 250–350 m/min 250–450 m/min 350–450 m/min 350–600 m/min 250–450 m/min 250–350 m/min 250–450 m/min 250–600 m/min 350–450 m/min 350–600 m/min 600–900 m/min 600–900 m/min 450–600 m/min 450–750 m/min 250–350 m/min 250–450 m/min 350–450 m/min 350–600 m/min 250–450 m/min 250–600 m/min 350–600 m/min 350–750 m/min 600–900 m/min 450–600 m/min 450–600 m/min
853 Pages | Valid until 12/2026 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.