KIPP Catalog Operating Elements & Standard Elements Page 1386
Commercial customer offer**Top sellers from KIPP
DIN ISO 1302 surface finish indication DIN ISO 2768 T1 and T2 general tolerances DIN ISO 1302 surface finish indication - KIPP products are adapted and manufactured in such a way that they are suitable for their general purpose with reference to material and surface finish. As such, they meet all normal tolerance requirements. Surface finish values, Ra for permissible roughness height Rt assignation according to DIN 3141 meaning according line 1 line 2 to ISO 1302 Graphical symbol of surface finish to DIN 3141 (Surface without graphical symbol) Surfaces which do not need to meet specific requirements even Surfaces which only have to meet requirements of general evenness and better appearance - All dimensions are indicated in mm. rough 6,3 25 12,5 6,3 3,2 1,6 0,8 Individual raw surfaces which may be remachined - The latest DIN standard sheet version applies to all parts made to DIN standards. Clean raw surface with higher requirements - Variations on dimensions without tolerance values are according to "DIN ISO 2768-mk". Surface with a roughness value which must not exceed the highest permissible medium roughness value General tolerances for linear and angular dimensions (DIN ISO 2768 T1) Linear Dimensions Tolerance class Deviations limits mm for nominal dimension ranges abbreviation description 0.5 up to 3 f fine ± 0.05 ± 0.05 ± 0.1 ± 0.15 ± 0.2 ± 0.3 ± 0.5 – m medium ± 0.1 ± 0.1 ± 0.2 ± 0.3 ± 0.5 ± 0.8 ± 1.2 ±2 c coarse ± 0.2 ± 0.3 ± 0.5 ± 0.8 ± 1.2 ±2 ±3 ±4 v very coarse – ± 0.5 ±1 ± 1.5 ± 2.5 ±4 ±6 ±8 over 3 up to 6 over 6 up to 30 over 30 up to 120 over 120 up to 400 over 400 up to 1000 over 1000 up to 2000 External Radii and Chamfer Heights Tolerance class Angular Dimensions Deviations limits mm for nominal dimension ranges 0.5 up to 3 over 3 up to 6 over 6 abbreviation description f fine ± 0.2 ± 0.5 ±1 m medium ± 0.2 ± 0.5 c coarse ± 0.4 ±1 v very coarse ± 0.4 ±1 over 2000 up to 4000 Deviation limits degrees and minutes for nominal dimension ranges (short leg) over 10 over 10 up to 50 over 50 up to 120 over 120 up to 400 over 400 ± 1° ± 0°30’ ± 0°20’ ± 0°10’ ± 0°5’ ±1 ± 1° ± 0°30’ ± 0°20’ ± 0°10’ ± 0°5’ ±2 ± 1°30’ ± 1° ± 0°30’ ± 0°15’ ± 0°10’ ±2 ± 3° ± 2° ± 1° ± 0°30’ ± 0°20’ General Tolerances for Form and Position (DIN ISO 2768 T2) Tolerance class up to 10 Straightness and Flatness Perpendicularity Symmetry nominal dimension ranges mm nominal dimension ranges mm nominal dimension ranges mm over 10 over 30 over 100 over 300 over 1000 over 100 over 300 over 1000 over 100 over 300 over 1000 up to 30 up to 100 up to 300 up to 1000 up to 3000 up to 100 up to 300 up to 1000 up to 3000 up to 100 up to 300 up to 1000 up to 3000 Run-out H 0.02 0.05 0.1 0.2 0.3 0.4 0.2 0.3 0.4 0.5 0.5 0.5 0.5 0.5 0.1 K 0.05 0.1 0.2 0.4 0.6 0.8 0.4 0.6 0.8 1 0.6 0.6 0.8 1 0.2 L 0.1 0.2 0.4 0.8 1.2 1.6 0.6 1 1.5 2 0.6 1 1.5 2 0.5 1385
1391 Pages | Valid until 12/2022 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.