AMF Catalogue Hydraulic clamping systems Page 194
Commercial customer offer**Top sellers from AMF Spannsysteme
bore clamp ma xi, hydraulic, centric No. 6970CD Bore clamp MAXI, hydraulic, centric Double-acting, max. operating pressure 150 bar, min. operating pressure 40 bar, lateral compensation per clamp ±0.25 mm. Article no. Clamping force Clamping force Clamping rim vertical vertical height at 100 bar at 150 bar min. for Al-alloy [kN] [kN] [mm] Order no. 556565 556566 556567 556568 556569 556570 6970CD-08 6970CD-09 6970CD-10 6970CD-11 6970CD-12 6970CD-13 dia. K L Md Weight [Nm] [g] 2,76 4,1 5 7,8 - 8,6 9 3,7 298 4,4 6,6 6 8,7 - 9,6 9 7,2 413 4,4 6,6 6 9,7 - 10,7 9 7,2 413 5,0 7,5 8 10,8 - 11,8 9 10,0 530 5,0 7,5 8 11,9 - 12,8 9 10,0 532 5,0 7,5 8 12,9 - 13,8 9 10,0 535 Design: The actuating piston is double-acting. Body, clamping segments and tension bolts are made of nitrided tempered steel. Four-part clamping segments are externally interlocked. Four fastening screws are supplied as standard. Oil supply via oil channel in fixture body. Application: The hydraulic bore clamp is preferred for use on workpieces with complex external geometries that must be clamped for machining. After the clamping segments are applied to single-attachment clamping holes with low depth, a secure 5-sided processing can be performed without difficulty. Workpieces can be installed or removed automatically with handling devices. Features: The tension bolt has the shape of a four-sided pyramid at the coupling point to the clamping sleeve. The clamping sleeve segments have this shape also, thus ensuring the sleeve segments have contact on the entire surface in every position of the tension bolt. This facilitates a high clamping power and ensures very low wear. Elastic rings hold the clamping segments together and seal them against entry of chips. Depending on the material, the external serration is pressed into the clamping hole with more or less force, thus permitting the required positive fit. The built-in plate springs achieve a max. pull-down stroke of approx. 0.2 mm during clamping. The integrated air connection L1 is used for cleaning the clamping area. This blow-off can also be used as a mount check for blind holes. The integrated air connection is used for cleaning the clamping control. With a suction volume flow meter, the volume flow is measured in the unclamped and clamped state of the workpiece. The difference is used for clamping control. The max. operating pressure should not exceed 6 bar here. The tension bolt has a pyramid shape for better pre-positioning of the workpieces. The drill clamp is also a contact surface for the workpiece. The workpiece contact surface is hard-metal coated (µ =0.3), which markedly increases the displacement force. Note: The lateral force when inserting the workpiece must not exceed the “lateral force” table value. The radial force must be observed. Please contact us if clamping hardened or cast workpieces. On request: Bore clamps for other hole diameters available upon request. Clamping hole in workpiece: CAD Subject to technical alterations. 194 Hydraulic clamping systems ANDREAS MAIER GmbH & Co. kg ∙ Phone: +49 711 5766-196 ∙ Web: www.amf.de
384 Pages | Valid until 12/2025 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.