AMF Catalogue Hydraulic clamping systems Page 160
Commercial customer offer**Top sellers from AMF Spannsysteme
Vertical Clamp No. 6958CK Vertical clamp MINI Double-acting, max. operating pressure 250 bar, min. operating pressure 35 bar. CAD Md Q max. ** [cm³] eff. piston area Sp [cm²] [Nm] [l/min] [g] 1,53 2,545 5,8 0,5 333 4,60 5,309 9,1 0,5 580 Piston force F5 at 250 bar [kN] Vol. Sp Vol. Lo [kN] Piston force F5 at 100 bar [kN] [cm³] 3,4 2,54 6,36 2,75 6,9 5,31 13,25 6,89 Article no. Clamping force F1 at 100 bar* Clamping force F1 at 250 bar* [kN] 562236 6958CK-16 1,36 563316 6958CK-20 2,90 Order no. Weight Cl = clamping, Uncl = unclamp * Specifications with clamping arm, standard Design: Housing, piston, piston crown made of tempered steel, tempered and nitrided, visible components, burnished. Two brass wipers integrated on the joint head. Connections for pneumatic monitoring of the clamping arm position. Supplied as standard with 4 x cylinder screws (strength 12.9) and clamping arm. Oil supply via oil channel in fixture body. clamping position Application: unclamping position The MINI vertical clamp is preferred for use in devices with little installation space. Through the oil supply in the fixture body, a very close array of the clamping elements is possible. The clamping arm position can be monitored pneumatically in the release and clamping position. Workpieces can be installed or removed automatically with handling devices. Features: The double-acting MINI vertical clamp permits a clearly defined movement of the clamp arm. The horizontal centre axis at the clamping lever and the pressure point on the workpiece lie in one plane. The pneumatic monitoring of the clamp arm position enables use in automatic production processes. The mechanism of the clamp is encapsulated by brass wipers, thereby ensuring very good protection against dirt. Note: Collision of the workpiece with the clamping arm must be avoided during loading and unloading of the clamp. Soiling at the vertical clamp must be considered or avoided through inclusion in the cleaning process. The lever ratio and operating pressure must be observed when using special clamping levers. Special attention must be paid to the tolerance of the clamping height H2; workpieces may only be clamped within this range! A = clamp B = unclamp Dimensions: Article no. Order no. A° A1 B B1 C ØD E1 f7 E2 H H1 H2 +2.9/-1.0 H3 H4 H5 H6 H7 L 5,0 M N P R S V V1 V2 W ØZ OR-1 O-ring Order No. 562236 6958CK-16 73,0 2,1 12 3 19 24 8,8 3,0 33 42,3 20,5 28 27 8,5 22,0 33 12,5 16,5 15 12 35 14,7 6,8 1,5 26 5,3 497461 563316 6958CK-20 67,6 0,8 14 4 25 33 6,7 2,2 35 49,1 21,0 29 40 9,7 36,6 16,7 40 15,0 20,0 17 15 40 17,0 9,0 9,0 30 6,2 497487 Subject to technical alterations. 160 Hydraulic clamping systems ANDREAS MAIER GmbH & Co. kg ∙ Phone: +49 711 5766-196 ∙ Web: www.amf.de
384 Pages | Valid until 12/2025 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.