Rothoblaas - X-RAD Seite 34
Gewerbekunden Angebot**Topseller von RothoBlaas Deutschland
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
X-ONE X-PLATE X-SEAL GUIDELINES FOR MODELLING THE XRAD SYSTEM STEP 1 STEP 2 Modelling starts with the definition of the base panel and the X-ONE connectors at the corners. The CLT panel can be modelled with “shell” elements as the rigidity of the CLT / X-RAD system is controlled by the deformability of the connection. The connector can be modelled with two square steel connecting rods with side measuring l = 5.51 mm and length 255 mm (“frame” elements placed at the corners of the panel). So a final X-RAD rigidity is obtained of k = 25 kN/mm. 255 mm 255 mm 25 kN/mm 25 kN/mm STEP 3 STEP 4 The representation of each X-RAD with two connecting rods allows a traction/compression force to be linked to the vertical frame element and a shearing force to the horizontal frame element. In order to simulate contact between panel-panel and panelfoundation, nonlinear gap springs are defined. These have infinite compression rigidity and no traction. SHEAR TENSION COMPRESSION C C NOTE: The full guidelines for modelling the X-RAD system can be downloaded from www.rothoblaas.com or from the MyProject software. These guidelines give an example of a possible sequence of useful tips to help you model CLT structures with the X-RAD system. It is the responsibility of the designer to define and study in depth the modelling process details needed for proper structural design. 32 X-ONE
84 Seiten | Gültig bis 04/2024 | Vorherige Seite | Nächste Seite
Sprache wählen
Rechtliches
Ausschließlich verantwortlich für Inhalt, Preis- und Artikelangaben der dargestellten Produkte und Angebote innerhalb der Kataloge ist der Hersteller. Technische und optische Änderungen des Herstellers und Irrtümer vorbehalten.
Anfrageformular für spezielle Produkte
Der ToolTeam® Beschaffungsservice
Sie suchen Produkte die im Katalog abgebildet, aber online nicht direkt kaufbar sind?Unser Beschaffungs-Service macht Ihnen gerne ein unverbindliches und individuelles Angebot.
