HEWI Catalog Sanitary Strana 519
Nabídka komerčních zákazníků **Nejlépe prodávané z HEWI
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Niche, not right-angled niche width washbasin width W2 W1 minimum 3 minimum 3 hanger bolt fixing 140 140 340 / 475 ≠ 90° silicone joint minimum 3 mm 1. Measure the precise dimensions of the wall at the installation height of the washbasin after the wall surface has been finished. 2. Check the wall for unevenness. 3. If the niche angle is not 90°, line on site to form 90°. 4. Define the side washbasin projections W1 and W2 Attention: minimum dimension W1/W2 = 425 mm, maximum dimension W1/W2 = 1400 mm. Please note that a silicone joint of at least 3 mm will be required on each side. lining at site silicone joint minimum 3 mm lining at site Zeichnungsnr. HEWI Heinrich Wilke GmbH Prof.-Bier-Strasse 1-5 34454 Bad Arolsen Firma Telefon +49 5691 82 0 Telefax +49 5691 82 319 www.hewi.de Datum Name hanger bolt fixing 140 140 340 / 475 ≠ 90° minimum 3 W1 minimum 3 W2 washbasin width niche width Niche, not right-angled Datum HEWI Heinrich Wilke GmbH Prof.-Bier-Strasse 1-5 34454 Bad Arolsen niche width Telefon +49 5691 82 0 Telefax +49 5691 82 319 www.hewi.de washbasin width minimum 3 W1 minimum 3 W2 hanger bolt fixing 140 140 ≠ 90° 340 / 475 ≠ 90° 1. Measure the precise dimensions of the wall at the installation height of the washbasin and the installation depth (340 mm) after the wall surface has been finished. 2. Check the wall for unevenness. 3. If the niche angle is not 90°, line on site to form 90°. 4. Define the side washbasin projections W1 and W2 Attention: minimum dimension W1/W2 = 425 mm, maximum dimension W1/W2 = 1400 mm. Please note that a silicone joint of at least 3 mm will be required on each side. niche width lining at site Niche | Door lining Prof.-Bier-Strasse 1-5 34454 Bad Arolsen silicone joint minimum 3 mm +49 5691 82 0 +49 5691 82 319 lining at site hanger bolt fixing 140 340 / 475 140 minimum 3 W1 W2 washbasin width niche width minimum 3 1. Measure the precise dimensions of the wall at the installation height of the washbasin after the wall surface has been finished. 2. Check the wall for unevenness. 3. Check whether the niche angles are each 90°. If door lining cannot be removed for installation of the washbasin 4. Determine the niche width (taking into account doorframe) 5. Define the side washbasin projections W1 and W2 Attention: minimum dimension W1/W2 = 425 mm, maximum dimension W1/W2 = 1400 mm. Please note that a silicone joint of at least 3 mm will be required on each side. HEWI Sanitary | 515 Washbasins variable length | Washbasins
784 Stránky | Platí do 12/2024 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.
