HEWI Catalog Sanitary Strana 518
Nabídka komerčních zákazníků **Nejlépe prodávané z HEWI
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Washbasins | variable length POSSIBLE INSTALLATION SITUATIONS | ORDERING INSTRUCTIONS Freely on the wall washbasin width W1 W2 hanger bolt fixing 140 340 / 475 140 1. Measure the precise dimensions of the wall at the installation height of the washbasin after the wall surface has been finished. 2. Check the wall for unevenness. 3. Define the side washbasin projections W1 and W2 Attention: minimum dimension W1/W2 = 425 mm, maximum dimension W1/W2 = 1400 mm. One-sided on the wall washbasin width minimum 3 W1 W2 hanger bolt fixing 140 340 / 475 140 1. Measure the precise dimensions of the wall at the installation height of the washbasin after the wall surface has been finished. 2. Check the wall for unevenness. 3. Check whether the solid angle is 90°. 4. Define the side washbasin projections W1 and W2 Attention: minimum dimension W1/W2 = 425 mm, maximum dimension W1/W2 = 1400 mm. Please note that a silicone joint at the side of at least 3 mm will be required. silicone joint minimum 3 mm Niche niche width washbasin width minimum 3 W1 W2 minimum 3 hanger bolt fixing 140 340 / 475 140 silicone joint minimum 3 mm left and right 514 | HEWI Sanitary 1. Measure the precise dimensions of the niche at the installation height of the washbasin after the wall surface has been finished. 2. Check the wall for unevenness. 3. Check whether the niche angles are each 90°. 4. Define the side washbasin projections W1 and W2 Attention: minimum dimension W1/W2 = 425 mm, maximum dimension W1/W2 = 1400 mm. Please note that a silicone joint of at least 3 mm will be required on each side.
784 Stránky | Platí do 12/2024 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.
