fischer Rögzítőrendszerek főkatalógusa Strana 149
Nabídka komerčních zákazníků **Nejlépe prodávané z Fischer
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Injection anchor sleeves · Chemical fixings Injection anchor sleeves FIS H K FIS H L FIS H N 3 Advantages Advantages Advantage · The grating structure of the FIS H K anchor sleeve is adapted for the injection mortars FIS V Plus, FIS V, FIS VL, FIS GREEN, FIS P Plus and FIS P, and ensures sparing mortar use with the best interlock. · The centring blades perfectly align the anchor in the anchor sleeve, and allow for use with various threaded rod diameters. · The barbed hooks secure the anchor sleeve in the drill hole and allow for a trouble-free overhead installation. · The geometry of the anchor sleeves allows for the bridging of non-bearing layers for a simple and convenient installation. · The metal anchor sleeve can be cut to the required length and thus allows for a range of usable lengths with just one produce, providing flexibility and cost-effectiveness. · The grating structure of the anchor sleeve allows for uniform distribution of mortar in the drill hole and thus for secure hold. · The net structure of the anchor sleeve allows for uniform distribution of mortar in the drill hole and thus for secure hold. Functioning Functioning Functioning · The system can be used with any of the following injection mortars: FIS V Plus, FIS VW Plus High Speed, FIS VS Plus Low Speed, [... FIS V], FIS VL, FIS GREEN or FIS P Plus. FIS P can be used but does not have approvals. · The system is suitable for pre-positioned installation when combined with injection anchor sleeves and threaded rods FIS A or internal threaded anchors FIS E. · The anchor sleeve is placed in the drill hole, and filled with injection mortar from the anchor sleeve base. · Turning in the anchor causes the mortar to be pushed through the anchor sleeve’s grating structure, so that it fits the base material perfectly. The load is borne by the interlock. · The anchor sleeve is at first cut to the required length. · The anchor sleeve is placed in the drill hole, and filled with injection mortar from the anchor sleeve base. · Turning in the anchor causes the mortar to be pushed through the anchor sleeve’s grating structure, so that it fits the base material perfectly. · The load is borne by the interlock. · The anchor sleeve is placed in the drill hole, and filled with injection mortar from the anchor sleeve base. · Turning in the anchor causes the mortar to be pushed through the anchor sleeve’s grating structure, so that it fits the base material perfectly. · The load is borne by the interlock. 149
684 Stránky | Platí do 12/2025 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.
