zoom_in
zoom_out
fullscreen
-15%
Woelm KWS 6009 lock for door thicknesses of 65 - 70 mm 600907
Sku: T-686031
86,25 € (inkl. 19% skatt, exkl. Frakt)
72,48 € (exkl. laglig moms, exkl. Frakt)
101,45 € Rekommenderat försäljningspris
I lager,klar för leverans inom 5 - 6 arbetsdagar
Bit
doneMade in Germany
Hot-dip galvanized malleable cast iron, with central axis made of steel, with locking catch, compression spring and felt seals, door operation in pairs, right/left information required
Innehåll:
1 Bit
Frakt:
The shipping costs for Sverige could not be calculated automatically.
Leverantör:
Försäljning och leverans med ToolTeam®
Betalningsmetoder:
Returnerar:
säkerhet:
Produktdata
Tillverkare:
HELM - Woelm GmbH
Skick:
Ny
Sku:
T-686031
SKU-tillverkare:
600907
GTIN-kod (EAN):
2000000686031
Vikt:
0,00 Kg
All information om produkter från HELM - Woelm GmbH. Tekniska och optiska ändringar av tillverkaren och reserverade fel.
This page has been machine-translated, the original german version can be found here, please also note the Ansvarsfriskrivning för översättning.
Produktbeskrivning
6009..
D = 65 - 70 mm
For two-sided door operation made of malleable cast iron with central axis made of steel, with locking catch, compression spring, felt seals
Door thicknesses >, 70 mm on request
Assembly
Drill a hole in the door for the axis according to the dimensions in the adjacent drawing, screw on the screw-on rosettes with felt seals underneath so that two screw holes are horizontal and two are horizontal .Align vertically with the central hole, push the pin part through and screw the hole part tight with a compression spring and a lock nut. Fasten the locking catch in the door frame at the appropriate point.
The operating range of the levers is 45º. The lock should be fitted so that the levers point upwards at an angle of 45º when in the open position.
Photo shows lock for left-hand door
Relaterade resultat
Kompletta kataloger
Erbjudandet riktar sig enbart till företagskunder, företag, offentliga institutioner, hantverkare och frilansare. Alla priser i kataloger är exklusive moms, fraktkostnader och tilläggsavgifter om tillämpligt.
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Matchande katalog
Kommersiell Kunderbjudande **
Produktförslag
-7%
KWS 6029 lock on base plate, one-sided
602902
33,40 €
exkl. Frakt
35,95 € Rekommenderat försäljningspris
exkl. Frakt
KWS 6029 lock on base plate, one-sided
602907
41,95 €
exkl. Frakt
exkl. Frakt
-9%
KWS 6101 lock for door thicknesses of 25 - 30 mm
610106
58,35 €
exkl. Frakt
64,29 € Rekommenderat försäljningspris
exkl. Frakt
-14%
KWS 6101 lock for door thicknesses of 25 - 30 mm
610182
269,60 €
exkl. Frakt
312,75 € Rekommenderat försäljningspris
exkl. Frakt
-18%
KWS 6101 lock for door thicknesses of 25 - 30 mm
610183
256,80 €
exkl. Frakt
312,75 € Rekommenderat försäljningspris
exkl. Frakt
-15%
KWS 6109 lock for door thicknesses of 65 - 70 mm
610906
71,45 €
exkl. Frakt
84,05 € Rekommenderat försäljningspris
exkl. Frakt
-19%
KWS 6109 lock for door thicknesses of 65 - 70 mm
610982
284,35 €
exkl. Frakt
352,49 € Rekommenderat försäljningspris
exkl. Frakt
-19%
KWS 6109 lock for door thicknesses of 65 - 70 mm
610983
284,35 €
exkl. Frakt
352,49 € Rekommenderat försäljningspris
exkl. Frakt
-7%
KWS 6128 locking plate e.g. Weld on, left/right
612806
35,20 €
exkl. Frakt
37,89 € Rekommenderat försäljningspris
exkl. Frakt
-18%
KWS 6128 locking plate e.g. Weld on, left/right
612882
173,65 €
exkl. Frakt
211,45 € Rekommenderat försäljningspris
exkl. Frakt
-18%
KWS 6128 locking plate e.g. Weld on, left/right
612883
173,65 €
exkl. Frakt
211,45 € Rekommenderat försäljningspris
exkl. Frakt
KWS 6533 locking catch for lock 6029..
653302
5,75 €
exkl. Frakt
exkl. Frakt
KWS 6533 locking catch for lock 6029..
653307
6,00 €
exkl. Frakt
exkl. Frakt
KWS 6536 locking catch for lock 6001..-6009..
653602
3,95 €
exkl. Frakt
exkl. Frakt
KWS 6536 locking catch for lock 6001..-6009..
653607
4,25 €
exkl. Frakt
exkl. Frakt
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Woelm KWS 6009 lock for door thicknesses of 65 - 70 mm 600907
on both sides
pressure spring
hot-dip galvanised
felt seal
lever
lever lock
Made in Germany
in pairs
locking catch
lock
two-sided
6009..
D = 65 - 70 mm
For two-sided door operation made of malleable cast iron with central axis made of steel, with locking catch, compression spring, felt seals
Door thicknesses >, 70 mm on request
Assembly
Drill a hole in the door for the axis according to the dimensions in the adjacent drawing, screw on the screw-on rosettes with felt seals underneath so that two screw holes are horizontal and two are horizontal .Align vertically with the central hole, push the pin part through and screw the hole part tight with a compression spring and a lock nut. Fasten the locking catch in the door frame at the appropriate point.
The operating range of the levers is 45º. The lock should be fitted so that the levers point upwards at an angle of 45º when in the open position.
Photo shows lock for left-hand door T-686031 600907 2000000686031 sv ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/sv-SE/woelm-kws-6009-lock-for-door-thicknesses-of-65-70-mm-600907-t-686031-2000000686031?dc=SE&cu=EUR 2026-09-15 86.25 Sverige SE DE 14
6009..
D = 65 - 70 mm
For two-sided door operation made of malleable cast iron with central axis made of steel, with locking catch, compression spring, felt seals
Door thicknesses >, 70 mm on request
Assembly
Drill a hole in the door for the axis according to the dimensions in the adjacent drawing, screw on the screw-on rosettes with felt seals underneath so that two screw holes are horizontal and two are horizontal .Align vertically with the central hole, push the pin part through and screw the hole part tight with a compression spring and a lock nut. Fasten the locking catch in the door frame at the appropriate point.
The operating range of the levers is 45º. The lock should be fitted so that the levers point upwards at an angle of 45º when in the open position.
Photo shows lock for left-hand door T-686031 600907 2000000686031 sv ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/sv-SE/woelm-kws-6009-lock-for-door-thicknesses-of-65-70-mm-600907-t-686031-2000000686031?dc=SE&cu=EUR 2026-09-15 86.25 Sverige SE DE 14