zoom_in
zoom_out
fullscreen
-7%
Woelm KWS 1318 gate holder for walling in, floor mounting 131807
Sku: T-681950
28,85 € (inkl. 19% skatt, exkl. Frakt)
24,24 € (exkl. laglig moms, exkl. Frakt)
30,99 € Rekommenderat försäljningspris
I lager,klar för leverans inom 48h
Bit
doneMade in Germany
Hot-dip galvanized steel
Innehåll:
1 Bit
Frakt:
The shipping costs for Sverige could not be calculated automatically.
Leverantör:
Försäljning och leverans med ToolTeam®
Betalningsmetoder:
Returnerar:
säkerhet:
Produktdata
Tillverkare:
HELM - Woelm GmbH
Skick:
Ny
Sku:
T-681950
SKU-tillverkare:
131807
GTIN-kod (EAN):
4041518135996
Vikt:
0,00 Kg
All information om produkter från HELM - Woelm GmbH. Tekniska och optiska ändringar av tillverkaren och reserverade fel.
This page has been machine-translated, the original german version can be found here, please also note the Ansvarsfriskrivning för översättning.
Produktbeskrivning
1318..
for gates up to 150 kg
for walling into the ground
Function
The gate will go through Automatically locked when pressed against the locking device. A slight pressure on the catch hook releases the gate again.
Assembly
The gate holder is embedded at the desired locking point, which should have the greatest possible distance to the gate hinge, at least 80 mm deep into the ground . At the appropriate point, the bracket is fastened to the goal with three screws so that the screw holes are above the catch hole. When locking the gate, the bracket also serves as a stop surface.
Relaterade resultat
Kompletta kataloger
Erbjudandet riktar sig enbart till företagskunder, företag, offentliga institutioner, hantverkare och frilansare. Alla priser i kataloger är exklusive moms, fraktkostnader och tilläggsavgifter om tillämpligt.
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Matchande katalog
Kommersiell Kunderbjudande **
Produktförslag
-15%
KWS 1315 gate holder for walling in, floor mounting
131507
115,70 €
exkl. Frakt
136,10 € Rekommenderat försäljningspris
exkl. Frakt
-15%
KWS 1315 gate holder for walling in, floor mounting
131503
115,70 €
exkl. Frakt
136,10 € Rekommenderat försäljningspris
exkl. Frakt
-7%
KWS 1318 gate holder for walling in, floor mounting
131803
28,85 €
exkl. Frakt
30,99 € Rekommenderat försäljningspris
exkl. Frakt
-15%
KWS 5062 shell handle 170 x 170 mm, 8 mm pin part, with pusher
506210
100,95 €
exkl. Frakt
118,75 € Rekommenderat försäljningspris
exkl. Frakt
KWS 8604 profile support 110 x 90 x 50 mm, sloping support
860422
18,79 €
exkl. Frakt
exkl. Frakt
KWS 2003 door buffer floor mounting, screwable, with pin
200333
17,15 €
exkl. Frakt
exkl. Frakt
-15%
KWS 7034 miter sleeve Ø 40 / Ø 40 mm pipe +/-50° adjustable
703483
131,39 €
exkl. Frakt
154,55 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 8216 door handle 150 x 150 x 18 mm handle plate, grained
821648
45,20 €
exkl. Frakt
49,75 € Rekommenderat försäljningspris
exkl. Frakt
-18%
KWS 7274 pipe bend 180°, r=200 mm, with inside/outside bores
727483
205,45 €
exkl. Frakt
250,20 € Rekommenderat försäljningspris
exkl. Frakt
-9%
HELM 981 S Galvanized steel roller, yellow, up to 250 kg
098111
42,70 €
exkl. Frakt
47,05 € Rekommenderat försäljningspris
exkl. Frakt
-15%
KWS 2049 door stop, wall mounting, spring-loaded
204933
133,25 €
exkl. Frakt
156,75 € Rekommenderat försäljningspris
exkl. Frakt
-18%
KWS 8169 door handle Ø35 mm, GL from 200 mm, variable support
816923
240,05 €
exkl. Frakt
292,35 € Rekommenderat försäljningspris
exkl. Frakt
-19%
KWS 8940 door handle Ø 40 mm, L 400 mm
894070
289,60 €
exkl. Frakt
359,05 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 5032 shell handle 100 x 100 mm, 10 mm pin part, snap ring
503266
72,89 €
exkl. Frakt
80,25 € Rekommenderat försäljningspris
exkl. Frakt
-18%
KWS 3F13 change set handle with button 3G10, round rosette
3F1383
192,15 €
exkl. Frakt
234,05 € Rekommenderat försäljningspris
exkl. Frakt
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Woelm KWS 1318 gate holder for walling in, floor mounting 131807
Floor mounting
walling in
catch hook
hot-dip galvanised
flat steel
Made in Germany
steel
gate holder
1318..
for gates up to 150 kg
for walling into the ground
Function
The gate will go through Automatically locked when pressed against the locking device. A slight pressure on the catch hook releases the gate again.
Assembly
The gate holder is embedded at the desired locking point, which should have the greatest possible distance to the gate hinge, at least 80 mm deep into the ground . At the appropriate point, the bracket is fastened to the goal with three screws so that the screw holes are above the catch hole. When locking the gate, the bracket also serves as a stop surface. T-681950 131807 4041518135996 sv ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/sv-SE/woelm-kws-1318-gate-holder-for-walling-in-floor-mounting-131807-t-681950-4041518135996?dc=SE&cu=EUR 2026-07-10 28.85 Sverige SE DE 14
1318..
for gates up to 150 kg
for walling into the ground
Function
The gate will go through Automatically locked when pressed against the locking device. A slight pressure on the catch hook releases the gate again.
Assembly
The gate holder is embedded at the desired locking point, which should have the greatest possible distance to the gate hinge, at least 80 mm deep into the ground . At the appropriate point, the bracket is fastened to the goal with three screws so that the screw holes are above the catch hole. When locking the gate, the bracket also serves as a stop surface. T-681950 131807 4041518135996 sv ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/sv-SE/woelm-kws-1318-gate-holder-for-walling-in-floor-mounting-131807-t-681950-4041518135996?dc=SE&cu=EUR 2026-07-10 28.85 Sverige SE DE 14