zoom_in
zoom_out
fullscreen
-19%
Woelm KWS 1017 door check with adjustable braking effect 101782
Sku: T-681492
275,29 € (inkl. 19% skatt, exkl. Frakt)
231,34 € (exkl. laglig moms, exkl. Frakt)
341,25 € Rekommenderat försäljningspris
I lager,klar för leverans inom 48h
Bit
doneMade in Germany
Stainless steel ground and matt
Innehåll:
1 Bit
Frakt:
The shipping costs for Sverige could not be calculated automatically.
Leverantör:
Försäljning och leverans med ToolTeam®
Betalningsmetoder:
Returnerar:
säkerhet:
Produktdata
Tillverkare:
HELM - Woelm GmbH
Skick:
Ny
Sku:
T-681492
SKU-tillverkare:
101782
GTIN-kod (EAN):
4041518131110
Vikt:
0,00 Kg
All information om produkter från HELM - Woelm GmbH. Tekniska och optiska ändringar av tillverkaren och reserverade fel.
This page has been machine-translated, the original german version can be found here, please also note the Ansvarsfriskrivning för översättning.
Produktbeskrivning
1017..
with adjustable braking effect, particularly suitable for garage doors, for example
Function
The door can be opened by overcoming the braking force open up to a maximum of 125º and is held in any position within this opening range. The braking force can be adjusted by turning the knurled screw (3).
Assembly
Attach the stop bracket (1) to the door hinge at a distance of 120 mm, measured from the axis of the door hinge to the middle of the hexagon nut. The distance from the lower edge of the frame to the screw holes of the stop bracket is 26 mm. Screw the mounting plate (2) under the frame at a distance of 525 mm (dimension X > 60 mm at a distance of 540 mm) from the axis of the door hinge to the center of the pivot point. When the door is closed, the distance between the door leaf and the mounting plate (2) should be 2 - 3 mm. Assembly instructions are included in each individual package. The door brake must not be used as an end stop.
Use
Max. door weight approx. 100 kg
Relaterade resultat
Kompletta kataloger
Erbjudandet riktar sig enbart till företagskunder, företag, offentliga institutioner, hantverkare och frilansare. Alla priser i kataloger är exklusive moms, fraktkostnader och tilläggsavgifter om tillämpligt.
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Matchande katalog
Kommersiell Kunderbjudande **
Produktförslag
-19%
KWS 1017 door check with adjustable braking effect
101783
275,29 €
exkl. Frakt
341,25 € Rekommenderat försäljningspris
exkl. Frakt
-15%
KWS 1017 door check with adjustable braking effect
101706
102,29 €
exkl. Frakt
120,30 € Rekommenderat försäljningspris
exkl. Frakt
-15%
KWS 1223 door check 60 mm stroke, inner parts stainless steel
122347
72,50 €
exkl. Frakt
85,30 € Rekommenderat försäljningspris
exkl. Frakt
-7%
KWS 8608 profile support 110 x 130 x 50 mm, sloping support
860824
22,95 €
exkl. Frakt
24,69 € Rekommenderat försäljningspris
exkl. Frakt
-18%
KWS 7274 pipe bend 180°, r=200 mm, with inside/outside bores
727483
205,45 €
exkl. Frakt
250,20 € Rekommenderat försäljningspris
exkl. Frakt
-15%
KWS 7034 miter sleeve Ø 40 / Ø 40 mm pipe +/-50° adjustable
703482
131,39 €
exkl. Frakt
154,55 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 7040 end plug for Ø 40 x 2 mm pipe
704082
45,79 €
exkl. Frakt
50,40 € Rekommenderat försäljningspris
exkl. Frakt
-15%
KWS 5062 shell handle 170 x 170 mm, 8 mm pin part, with pusher
506210
100,95 €
exkl. Frakt
118,75 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 4242 partition wall support 125 - 150 mm high, angled support
424270
65,80 €
exkl. Frakt
72,45 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 4014 partition wall support 150 mm high, angled support
401432
52,55 €
exkl. Frakt
57,85 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 2074 door buffer 60 mm wall clearance, Ø 30 mm, with rosette
207462
38,19 €
exkl. Frakt
42,05 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 4264 partition wall support 150 mm high, 30 mm support
426432
38,30 €
exkl. Frakt
42,19 € Rekommenderat försäljningspris
exkl. Frakt
-18%
KWS 7301 pipe bend 90° double bend, with side holes
730182
136,85 €
exkl. Frakt
166,65 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 2066 door buffer 120 mm wall clearance, Ø 30 mm, spring-loaded
206670
59,19 €
exkl. Frakt
65,15 € Rekommenderat försäljningspris
exkl. Frakt
-9%
KWS 5041 shell handle Ø 110 mm, 10 mm pin section, snap ring
504103
39,79 €
exkl. Frakt
43,80 € Rekommenderat försäljningspris
exkl. Frakt
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Woelm KWS 1017 door check with adjustable braking effect 101782
Braking effect
stainless steel
stainless steel
garage
brushed
ground
Made in Germany
matt
matt brushed
adjustable
1017..
with adjustable braking effect, particularly suitable for garage doors, for example
Function
The door can be opened by overcoming the braking force open up to a maximum of 125º and is held in any position within this opening range. The braking force can be adjusted by turning the knurled screw (3).
Assembly
Attach the stop bracket (1) to the door hinge at a distance of 120 mm, measured from the axis of the door hinge to the middle of the hexagon nut. The distance from the lower edge of the frame to the screw holes of the stop bracket is 26 mm. Screw the mounting plate (2) under the frame at a distance of 525 mm (dimension X > 60 mm at a distance of 540 mm) from the axis of the door hinge to the center of the pivot point. When the door is closed, the distance between the door leaf and the mounting plate (2) should be 2 - 3 mm. Assembly instructions are included in each individual package. The door brake must not be used as an end stop.
Use
Max. door weight approx. 100 kg T-681492 101782 4041518131110 sv ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/sv-SE/woelm-kws-1017-door-check-with-adjustable-braking-effect-101782-t-681492-4041518131110?dc=SE&cu=EUR 2026-07-10 275.29 Sverige SE DE 14
1017..
with adjustable braking effect, particularly suitable for garage doors, for example
Function
The door can be opened by overcoming the braking force open up to a maximum of 125º and is held in any position within this opening range. The braking force can be adjusted by turning the knurled screw (3).
Assembly
Attach the stop bracket (1) to the door hinge at a distance of 120 mm, measured from the axis of the door hinge to the middle of the hexagon nut. The distance from the lower edge of the frame to the screw holes of the stop bracket is 26 mm. Screw the mounting plate (2) under the frame at a distance of 525 mm (dimension X > 60 mm at a distance of 540 mm) from the axis of the door hinge to the center of the pivot point. When the door is closed, the distance between the door leaf and the mounting plate (2) should be 2 - 3 mm. Assembly instructions are included in each individual package. The door brake must not be used as an end stop.
Use
Max. door weight approx. 100 kg T-681492 101782 4041518131110 sv ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/sv-SE/woelm-kws-1017-door-check-with-adjustable-braking-effect-101782-t-681492-4041518131110?dc=SE&cu=EUR 2026-07-10 275.29 Sverige SE DE 14