Woelm Catalogue HELM Hardware for Sliding Shutters Sida 11
Kommersiell Kunderbjudande **Toppförsäljare från HELM KWS by Woelm
exkl. Frakt
HELM Hardware for Sliding Shutters Order and Enquiry Data/Installation Types Enquiry and order information • window dimensions • dimensions, weight and material of the sliding shutters • number and arrangement of leaves, operational description, e. g. fig. 40.2 • mounting type for the track • type of drive (manual or with electric drive) • with or without holders (in case of manually operated installations) • type of bottom guide General information For the drafting of offers or for dealing with your enquiries quickly we would like to ask you for submitting a construction drawing or a sketch with the following information: (enquiry form Page 93) Installation types fig. 40.1 Single-leaf installation: • The installation can be operated manually or electrically. fig. 40.3 Two leaves run in two tracks: • type 1: The front leaf pulls the rear leaf into the desired position by means of a clamp provided by the customer. • type 2: The front leaf pulls the rear leaf into the desired position by means of telescopic deflection. • The installation can be operated manually or electrically. fig. 40.5 Three leaves run in three tracks: • type 1: The front leaf pulls the rear leaf into the desired position by means of a clamp provided by the customer. type 2: The front leaf pulls the rear leaf into the desired position by means of telescopic deflection. • The installation can be operated manually or electrically. fig. 40.7 Two-leaf folding installation: • The widths of the individual leaves should not exceed 700 mm. • The mounting is effected by means of fixed bearing or blind frame hinging. fig. 40.2 Two leaves run in one track profile and can: • be moved independently from each other • be moved simultaneously in opposite directions (synchronize) • be operated manually or electrically fig. 40.4 Three-leaf installation (two plus one): Three leaves run in two tracks: • Type 1: two-leaf element: The front leaf pulls the rear leaf into the desired position by means of a clamp provided by the customer. • Type 2: two-leaf element: The front leaf pulls the rear leaf into the desired position by means of telescopic deflection. • The leaves are moved independently from each other. • The installation can be operated manually or electrically. fig. 40.6 Four-leaf installation (two + two): Four leaves run in two tracks: • Type 1: two-leaf element: The front leaf pulls the rear leaf into the desired position by means of a clamp provided by the customer. • Type 2: two-leaf element: The front leaf pulls the rear leaf into the desired position by means of telescopic deflection. • The leaves can be moved independently from each other. • The leaves can be moved simultaneously in opposite directions (synchronize). • The installation can be operated manually or electrically. fig. 40.8 Three-leaf folding installation: • The widths of the individual leaves should not exceed 700 mm. • The mounting is effected by means of fixed bearings or blind frame hinging. 11 TEH_40/10.2017
96 Sidor | Gäller till 12/2020 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.