Rothoblaas - Tapes, Sealants and Membranes Sida 277
Kommersiell Kunderbjudande **Toppförsäljare från RothoBlaas Deutschland
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
TECHNICAL DATA Properties standard value USC conversion Mass per unit area EN 1849-2 260 g/m2 0.85 oz/ft2 Thickness EN 1849-2 approx. 0,6 mm approx. 24 mil Water vapour transmission (Sd) EN 1931 0,22 m - Water vapour transmission (dry cup) ASTM E96/ E96M - 16.5 US perm Maximum tensile force MD/CD EN 12311-1 315 / 250 N/50mm 36 / 29 lb/in Elongation MD/CD EN 12311-1 61 / 66 % - Resistance to nail tearing MD/CD EN 12310-1 255 / 260 N 57 / 58 lbf Watertightness EN 1928 class W1 - Temperature resistance - -30 / 80 °C -22 / 176 °F Resistance to penetration of air EN 12114 0 m3/(m2h50Pa) 0 cfm/ft2 at 50Pa Thermal conductivity (λ) - 0,3 W/(m·K) 0.17 BTU/h∙ft∙°F Specific heat - 1800 J/(kg·K) - Density - 433 kg/m3 approx. 0.25 oz/in3 Water vapour resistance factor (μ) - approx. 366 approx. 1.1 MNs/g UV stability(1) EN 13859-1/2 3 months - Exposure to weather(1) - 4 weeks - After ageing: - watertightness EN 1297 / EN 1928 class W1 - - maximum tensile force MD/CD EN 1297 / EN 12311-1 295 / 225 N/50mm 34 / 26 lb/in EN 1297 / EN 12311-1 45 / 47 % - Adhesion strength on steel at 180° - elongation EN 12316-2 12,5 N/cm 7.1 lb/in 180° adhesion force on proper support EN 12316-2 8,5 N/cm 5 lb/in Joint strength EN 12317-2 132 N/50mm 15 lb/in Solvents - no - Storage temperature - 5 / 25 °C 41/77 °F Application temperature - -5 / 35 °C 23 / 95 °F (1) For the correlation between laboratory tests and actual conditions, see page 199. Available in different configurations on request. It is possible to customise the mass per unit area of the membrane, the amount of acrylic glue, the size and the pre-cut of the liner. SPECIAL GLUE The acrylic dispersion glue has a specific formulation to ensure breathability and does not alter the functions of the functional film inside the membrane. BREATHABLE | TRASPIR ADHESIVE 260 | 277
339 Sidor | Gäller till 04/2024 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
