Rothoblaas - Plates and Connectors Sida 139
Kommersiell Kunderbjudande **Toppförsäljare från RothoBlaas Deutschland
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
CODES AND DIMENSIONS NEO 10 AND NEO 20 CODE description s B L [mm] [mm] [mm] stripe stripe stripe stripe sheet sheet NEO101280 NEO101680 NEO202080 NEO202480 NEO10PAL NEO20PAL weight pcs [kg] L 10 10 20 20 10 20 120 160 200 240 1200 1200 800 800 800 800 800 800 1,46 1,95 4,86 5,84 14,6 29,2 1 1 1 1 1 1 s B L weight pcs B B L NEO 10 CE CODE description [mm] [mm] [mm] stripe stripe 10 10 160 200 800 800 1,60 2,00 1 1 description s B L weight pcs NEO101680CE NEO102080CE L [kg] B NEO 20 CE CODE [mm] [mm] [mm] stripe stripe NEO202080CE NEO202480CE 20 20 200 240 800 800 L [kg] 4,00 4,80 1 1 B TECHNICAL SPECIFICATIONS NEO Characteristics values g/cm3 Density 1,25 NEO CE Characteristics regulations values g/cm3 Density - Shear modulus G EN 1337-3 p. 4.3.1.1 MPa printed specimen specimen from a support printed specimen specimen from a support 1,25 0,9 ≥ 16 Tensile strength - ISO 37 type 2 MPa Minimum elongation at failure - ISO 37 type 2 Minimum strength to laceration 24 h; 70 °C ISO 34-1 method A kN/m ≥8 Residual deformation after compression spacer 9,38 - 25 % ISO 815 / 24 h 70 °C % ≤ 30 Resistance to ozone elongation: 30 % - 96 h; 40 °C ± 2 °C; 25 pphm ISO 1431-1 visual Accelerated ageing (minimum variation of the non-aged value) ISO 188 - no visible cracks - 5 + 10 Hardness 7 d, 70 °C ISO 48 IRHD 60 ± 5 Tensile strength 7 d, 70 °C ISO 37 type 2 % ± 15 Elongation at failure 7 d, 70 °C ISO 37 type 2 % ± 25 ≤ 14 425 % 375 COMPRESSION STRENGTH: • The characteristic compressive strength Rk for simple bearing supports is calculated according to EN 1337-3� Rk = min 1,4 G A2 lp 1,8t • The design values are obtained from the characteristic values as follows: Rd=Rk / γ M The coefficient γ M should be taken according to the current regulations used for the calculation� ;7 A G with plate A=area, lp= perimeter and t=thickness� CONCEALED BEAM JOINTS | NEO | 139
576 Sidor | Gäller till 04/2024 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
