Rothenberger ROWELD Catalog Sida 31
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
ROWELD Catalog Cutting plastic / MLP, manual ROCUT 42 Twin Cut Shears for cutting all common plastic pipes with a diameter of 0–42 mm (0–1.5/8″) Application Benefits • Two function in one shear: one cut and ratchet cut function. • With the one cut function pipes can be cut 80 % faster. You also save time since little calibration is needed. • Ratchet cut function: if the pipe dimension is too large or the material too thick for a one cut, the shears automatically switches into the ratchet mode • The quick adjustment of the blade moves directly to the pipe and saves time at work • Cutting requires 20 % less effort due to the PTFE coated blade. Technical Data Working area direct cut Ø 0–20 mm Working area ratchet cut Ø 20–42 mm Blade V-Contour, PTFE coated Suitable for PP, PE, PEX, PB, PVDF Powerful cutting with the ratchet function. With the one cut function pipes can be cut 80 % faster. You also save time since little calibration is needed.¹ Model Weight PU ROCUT 42 Twin Cut, 0–42 mm (0–1.5/8″) 0.550 kg 1 No. 1000003011 1) Internally tested. In comparison to the previous ROCUT TC 42 with a 16 mm pipe. ROCUT 26 MSR Plastic pipe shears The ROCUT 26 MSR is suitable for cutting multilayer composite and plastic pipes with a diameter of 0–26 mm (0–1″). Application Benefits Technical Data • Especially suitable for multilayer composite pipes with an aluminum core, it can also cut all standard plastic pipes up to a diameter of 26 mm. • The curved steel blade enables an exact, right-angled cut and minimizes deformation of the pipe • Wide pipe support: the pipe cannot tilt and can be cut precisely and straight • Rubberized handle: for a secure grip without slipping during work • Transport lock: the pliers legs can be locked in the transport position after use Working area Ø 0–26 mm (0–1″) Suitable for PP, PE, PEX, PB, PVDF, MLP pipes Model Weight PU ROCUT 26 MSR, 0–26mm (0–1″) 0.335 kg 1 1) Internally tested. In comparison to the previous ROCUT TC 42 with a 16 mm pipe. No. 1000004324 31
40 Sidor | Gäller till 12/2026 | Previous page | Nästa sida
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.