Riegler Main Catalog Compressed Air Technology and Pneumatics Sida 485
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
HOSE COUPLINGS Quick disconnect couplings DN 7.2 »R26EMS« series, connect line type one side sealing Universal, one-hand quick disconnect couplings, one side sealing, at an unbeatably low price. The closed sleeve protects the coupling from dirt. In combination with steel plugs, this coupling can also be used for pneumatic tools thanks to its hardened locking pins. Couplings and plugs with thread sealing coating: Ready-to assemble polyacrylate thread coating provides an instant, tight seal without curing. The permanently elastic sealant can be adjusted up to 45° without influencing the seal. Safe to use. Easy to assemble and disassemble. To prevent injuries or a "whiplash" effect, we recommend that the plug-in nipple is held with one hand during uncoupling. These quick disconnect couplings are not suitable for direct attachment to pulsating tools. We recommend using our vibration dampers, according to ISO 6150 § 7.1. Areas of application: Pneumatic system, machine and plant engineering, measurement, monitoring and control systems, manufacturing industry, medical technology, chemical / pharmaceutical industry, workshops, automotive. Medium temperature Ambient temperature Flow rate Flow rate measurement Housing Sleeve Valve body Spring Retaining ring Locking pins Sealant -20 to 100 °C -20 to 100 °C 1000 l/min (air) at 6 bar and ∆p = 0.5 bar Brass with a bare metal surface Brass with a bare metal surface Brass with a bare metal surface Stainless steel Stainless steel Stainless steel NBR Quick disconnect coupling DN 7.2, brass with a bare metal surface, male Art. No. Type No. Operating pressure Connection 115611 115612 115614 115616 243.00-E 243.01-E 243.02-E 243.03-E 0 to 35 bar, maximum static working pressure (non-pulsating) 0 to 35 bar, maximum static working pressure (non-pulsating) 0 to 35 bar, maximum static working pressure (non-pulsating) 0 to 35 bar, maximum static working pressure (non-pulsating) G 1/8 ET G 1/4 ET G 3/8 ET G 1/2 ET Length mm 37.5 39.0 39.0 40.5 a/f mm 21 21 21 21 Price € 4.95 4.95 4.95 4.95 243.01-E Quick disconnect coupling DN 7.2, brass with a bare metal surface, male, with thread sealing coating Art. No. 117798 117807 117816 Length mm 243.01-EB 0 to 12 bar, maximum static working pressure (non-pulsating) G 1/4 ET 39.0 243.02-EB 0 to 12 bar, maximum static working pressure (non-pulsating) G 3/8 ET 39.0 243.03-EB 0 to 12 bar, maximum static working pressure (non-pulsating) G 1/2 ET 40.5 Type No. Operating pressure Connection a/f mm 21 21 21 Price € 5.66 5.66 5.66 243.01-EB Quick disconnect coupling DN 7.2, brass with a bare metal surface, female Art. No. 115618 115632 115644 Length mm 243.11-E 0 to 35 bar, maximum static working pressure (non-pulsating) G 1/4 IT 40.5 243.22-E 0 to 35 bar, maximum static working pressure (non-pulsating) G 3/8 IT 40.5 243.33-E 0 to 35 bar, maximum static working pressure (non-pulsating) G 1/2 IT 42.5 Type No. Operating pressure Connection a/f mm 21 21 24 Price € 4.95 4.95 5.22 243.33-E Quick disconnect coupling DN 7.2, brass with a bare metal surface, with hose stem Art. No. Type No. Operating pressure Connection 115646 115652 115648 115653 115650 243.44-E 243.47-E 243.45-E 243.49-E 243.46-E 0 to 35 bar, maximum static working pressure (non-pulsating) 0 to 35 bar, maximum static working pressure (non-pulsating) 0 to 35 bar, maximum static working pressure (non-pulsating) 0 to 35 bar, maximum static working pressure (non-pulsating) 0 to 35 bar, maximum static working pressure (non-pulsating) I.D. 6 I.D. 8 I.D. 9 I.D. 10 I.D. 13 Length mm 54.0 54.0 54.0 54.0 53.5 Price € 5.17 5.17 5.17 5.17 5.17 243.44-E You can find vibration dampers on page 851 Please note the following safety notice for the quick disconnect couplings with thread sealing coating: Because of the ignorance which thread types, dimensions, materials, pairings and surfaces are prevailing, it is necessary to perform appropriate control tests of the desired function before a general application or a use in serial production under the respective practical conditions to convince themselves. Any further claims, in particular the liability for consequential damages, are excluded. 485
944 Sidor | Gäller till 12/2024 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.