RHODIUS Main Catalogue Sida 120
Kommersiell Kunderbjudande **Toppförsäljare från Rhodius
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Grain: better yield for stock removal The right abrasive grain is decisive for performance, surface treatment quality and cost-effectiveness: it is the grain that does most of the work during grinding and stock removal. The properties ‘hardness’ and ‘toughness’ for a grain type influence performance depending on the material application. The grain sizes for coated abrasives ranges from P12–P2500 and are defined by FEPA (based on the ISO standard). The common synthetic grain types are: Properties Aluminium oxide Silicon carbide Zirconium Ceramic alumina Shape Cubic, angular Cone-shaped, sharp-edged Sharp-edged, self-sharpening Microcrystalline, sharp-edged 9.6/less tough 6.5 – 7.5/very tough 8.5/toughest Hardness/toughness 9.0/tough Applications – Leather – Wood – Filler – Steel – Non-ferrous metals Grain colour Brown, rose and white – Stone – Plastic – Glass – Paints – Chip board Black and green – Stainless steel – Steel – Aluminium – – – – Stainless steel Steel Aluminium Alloys Grey White * self-sharpening * self-sharpening Structure Active grinding coating: more powerful layer for layer Additional coatings with abrasive additives have a positive influence on the grinding process by either ensuring a cooler grinding operation, preventing clogging or extending the lifetime of the abrasive. This type of coating is especially useful for materials that clog easily, such as aluminium and paints, or for materials with poor thermal conductivity, such as stainless (inox) steel. These layers are applied as additional top coats, and may sometimes work to colour the product. All coatings can be used on stainless steel (no Fe or S) EN 2024/2025 120 +49 2636 96910-2400 +49 2636 96910-6111 [email protected] www.rhodius-abrasives.com
278 Sidor | Gäller till 12/2024 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
