Remko Stationary Hot Air Heating Systems Sida 5
Kommersiell Kunderbjudande **Toppförsäljare från Remko
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
STATIONARY HOT AIR HEATING SYSTEMS Rapid heat, adapted to your needs Tailored heating of halls Adaptable and expandable Stationary hot air heaters are mainly used in industrial halls for continuous operation. They are installed to walls, ceilings or floors and can be adapted to the specific circumstances of the installation site according to the modular principle. Hot air heaters, however, can also be connected to an existing hot air heating plant. The heat can be directed wherever needed in a targeted manner using air control fins. Due to the easy assembly of the units, the required heating capacity can be adapted and expanded as needed at any time. An extensive heating pipe system does not have to be laid first as the oil- or gas-operated heaters operate without a transfer medium. The heat is dissipated immediately to the ambient air. This saves energy, providing pleasant temperatures immediately. Fresh-air operation Mixed-air operation The air to be heated is taken directly from the outside. In case of corresponding outside conditions, this method guarantees clean, unused air. Fresh air is brought into the room from outside (only ventilation, no heating) during fresh-air operation in the summer. According to the setting, more or less fresh air is suctioned in together with the room air. This method reduces heating costs because previously heated air from the heated room is used on the one hand and covers the necessary fresh-air requirement on the other. Recirculation air operation The air is taken from the room being heated and blown into the same room again after heating. This method cases the lowest operating costs because only the previously heated room air is reheated and circulated. 5
44 Sidor | Gäller till 12/2024 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
