Remko Stationary Hot Air Heating Systems Sida 31
Kommersiell Kunderbjudande **Toppförsäljare från Remko
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
REMKO PWW SERIES Hot water heaters | Planning aids REMKO injection shutter REMKO PWW with mounted injection shutter Injection shutter An economical expansion to your REMKO PWW unit. Installation The supply air is blown in optimally through the injection shutter, while the position of the air control fins influences the air speed and the air discharge temperature of the entire air stream. With this technology, REMKO PWW units achieve greater blowing ranges and a quick heating of the areas subject to temperature control. Intake of the already heated room air prevents the occurrence of layers with varying air temperatures. The heat is distributed evenly throughout the room. The injection shutter can be mounted to your REMKO PWW unit at a later point in time without a problem and without great effort. The position of the fins can also be electrically regulated via an optional controller. Unclip the existing fins and fix the injection shutter with four screws. The position of the fins can also be electrically regulated via an optional controller. ■ Further blowing range due to addition of room air ■ Faster and more even heating at same unit output ■ Suited for wall and ceiling operation ■ Problem-free mounting (even later) ■ Electrical adjustment and regulation of the fin position possible Nozzle-shaped air outlet opening The air outlet speed is increased by the nozzle-shaped air outlet opening and, at the same time, secondary air is laterally inducted by the profile. The air jet penetrates more deeply into the room. The desired room temperature is thus achieved more quickly. Injection shutter diagram Blowing range without injection shutter Blowing range with injection shutter Suctioned room air Suctioned room air 31
44 Sidor | Gäller till 12/2024 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
