Pneumax - Hauptkatalog Sida 607
Kommersiell Kunderbjudande **Toppförsäljare från Pneumax GmbH
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Air service units Series Airplus Regulators (R - RM - RW - RP - RZ) Diaphragm pressure regulator with relieving Available in 4 sizes with flow rates up to 8000 Nl/min and connections from 1/8” to 1” Low histeresis rolling diaphragm and balanced spool Available in four pressure ranges up to 12 bar Fitted with panel mounting locking ring Available with pressure gauge or digital pressure switch integrated Atex certification (II 2GD or II 3GD) Inlet pressures up to 20 bar 1 Note For installations where a more accurate and constant pressure is required, the unit should be installed as close as possible to the point of use. 2 Technical characteristics Size Body and connections type Size 1 / IN / OUT connections Size 2 Size 3 Technopolymer body, integrated technopolymer connections (T version) Technopolymer body, metal connections (N version) / / Aluminium body, integrated aluminium connections (P - L versions) T version G1/4” G3/8” G1/2” N version G1/8” - G1/4” - 1/4” NPT G3/8” - G1/4” - 3/8” NPT G3/8” - G1/2” - 1/2” NPT not available G3/8” - 1/4” NPT G1/2” - 1/2” NPT P and L version Size 4 Assembly configuration Stand alone Panel mounting With fixing bracket / Assembly positions Indifferent Pressure range 0-2 bar 0-4 bar 0-8 bar 0-12 bar (P2 max 10 Bar in case of digital pressure switch selection) Regulation Manul push and lock with pressure Manual lockable with accessories Pressure measurement G1/8” - 1/8” NPT pressure gauge connection port (only for versions with IN / OUT NPT connections) Integrated pressure gauge (optional) Digital pressure switch (optional) Max. fittings torque IN / OUT connections G1/8” metal: 15Nm G1/4” metal: 20Nm G1/4” technopolymer: 9Nm Max.fitting torque pressure gauge connection port G1/8” technopolymer: 4Nm G1/8” metal: 15Nm not available G1” - 1” NPT Panel mounted G1/4” metal: 20Nm G3/8” metal: 25Nm G3/8” technopolymer: 16Nm G3/8” metal: 25Nm G1/2” metal: 30Nm G1/2” technopolymer: 22Nm G1”metal: 35Nm Size 3 Size 4 Operational characteristics Size Maximum working pressure Size 1 20 bar (only for P - L versions) Minimum working pressure Working temperature Size 2 13 bar 0,5 bar -5°C +50°C -30°C +80°C (only for P version) -40°C +80°C (only for L version) Working temperature with digital pressure switch 0°C +50°C Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 2 | 33 AIR TREATMENT 2
1106 Sidor | Gäller till 06/2025 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
