Pneumax - Electric drives Sida 9
Kommersiell Kunderbjudande **Toppförsäljare från Pneumax GmbH
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Electric cylinders Series 1800 Mounting Standard ISO 15552 (only for fixing interface) Rod version non rotation piston rod Transmission type ball screw Rod stainless steel Head nut stainless steel Heads anodised aluminuim Profiled tube anodised aluminuim Operational characteristics U.M. Value Environment temperature °C 0/+60 Storage temperature °C -20/+60 IP Rating - IP65 Air relative humidity % 90% (condensation not admitted) Out of control impact at the end of the stroke - NOT ADMITTED (recommended addition to stroke min. 30mm) Magnetic piston - yes Technical characteristics U.M Ball screw pitch mm Ball screw diameter mm Maximum torque admitted In-line motor Parallel motor Friction torque Nm Size 32 5 10 Size 40 12 5 12 1,8 Nm 3,0 10 Size 50 16 5 16 4,1 5,8 0,1 7,0 10 Size 63 20 5 20 6,1 7,8 0,2 13,1 ELECTRIC ACTUATION Construction characteristics 10 25 25 22,0 15,0 12,2 0,3 22,6 34,3 20,0 20,0 0,5 Coefficient of dynamic axial load N 4.700 4.700 5.450 15.200 9.600 9.600 17.650 18.300 12.350 23.500 27.150 13.600 Admitted axial load N 1.950 1.650 1.900 6.550 3.900 2.150 8.750 7.350 6.200 13.750 12.750 7.750 Efficiency - 0,9 Maximum stroke mm Minimum stroke mm Maximum admitted rotary speed rpm (see the graphs in the Technical data section) (see the graphs in the Technical data section) Maximum admitted linear speed m/s (see the graphs in the Technical data section) (see the graphs in the Technical data section) Maximum admitted acceleration m/s2 Repetition accurancy mm Maximum axial play mm Maximum rod rotation angle (°) 800 1000 1200 30 5 13 15 4 12 20 4 10 20 4 10 20 ≤0,04 ≤0,05 ≤0,04 ≤0,04 ≤0,05 ≤0,04 ±0.015 ≤0,02 ≤0,04 ±0.25 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 7
40 Sidor | Gäller till 06/2025 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
