Pneumax - Compressed air treatment Sida 10
Kommersiell Kunderbjudande **Toppförsäljare från Pneumax GmbH
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Modular FRL Series Airplus Filters (F) Double filter action: air flow centrifugation and filter element Available in 4 sizes with flow rates up to 14000 Nl/min and connections from 1/8” to 1” Filtering cartridge made of HDPE available in three different filtration grades (5 µm, 20 µm, 50 µm) AIR TREATMENT Filter cartridge can be regenerated by washing / blowing it or replaced Bowl assembly via bayonet type quick coupling mechanism with safety button Semi-automatic or automatic drain Atex certification (II 2GD or II 3GD) Inlet pressures up to 20 bar 1 2 1 Note In order to ensure that any fluid discharged by the auto drain assembly is adequately drained away, it is recommended you use a 6 mm fitting and tube. 2 Technical characteristics Size Size 1 Size 2 Size 3 / Aluminium body, integrated aluminium connections (P - L versions) / Technopolymer protection - PC bowl Technopolymer protection - PA bowl Protection and bowl type Metal protection - PC bowl Metal protection - PA bowl Metal bowl (blind metal bowl) / IN / OUT connections Size 4 Technopolymer body, integrated technopolymer connections (T version) Technopolymer body, metal connections (N version) Body and connections type T version G1/4” G3/8” G1/2” N version G1/8” - G1/4” - 1/4” NPT G3/8” - G1/4” - 3/8” NPT G3/8” - G1/2” - 1/2” NPT not available G3/8” - 1/4” NPT G1/2” - 1/2” NPT P and L version Assembly configuration not available G1” - 1” NPT Stand alone / Panel mounted Vertical ±5° Assembly positions Filter pore size 5 µm 20 µm 50 µm 18 cm3 Bowl capacity 34 cm3 Condensation drain 68 cm3 90 cm3 G3/8” metal: 25 Nm G1/2” metal: 30 Nm G1/2” technopolymer: 22 Nm G1” metal: 35 Nm Semi-automatic Automatic Max. fittings torque IN / OUT connections G1/4” metal: 20 Nm G3/8” metal: 25 Nm G3/8” technopolymer: 16 Nm G1/8” metal: 15 Nm G1/4” metal: 20 Nm G1/4” technopolymer: 9 Nm Operational characteristics Size Size 1 Condensation drain Maximum working pressure Size 3 Size 4 Size 1 Size 2 Semi-automatic 20 bar (only with body and metal bowl) 16 bar (only with body and metal bowl) 0,5 bar -5 °C ... +50 °C / -30 °C ... +80 °C (only for P version and metal bowl) -40 °C ... +80 °C (only for L version and metal bowl) Size 4 10 bar / 0,5 bar Working temperature Size 3 Automatic 13 bar / Minimum working pressure 7 Size 2 -5 °C ... +50 °C Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice
94 Sidor | Gäller till 06/2025 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
