PFERD Tools Main Catalogue Sida 98
Kommersiell Kunderbjudande **Toppförsäljare från PFERD
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
TC burrs Cutting speeds – burrs for universal applications Recommended rotational speed range [RPM] 2 To determine the recommended cutting speed range [m/min], please proceed as follows: ① Select the material group to be machined. ② Determine the type of application. ③ Select the cut. ④ Establish the cutting speed range. To determine the recommended rotational speed range [RPM], please proceed as follows: ⑤ Select the required burr diameter. ⑥ The cutting speed range and the burr diameter determine the recommended rotational speed range. ① Material group Steel, cast steel ② Used for Steels up to 1,200 N/mm² (< 38 HRC) Construction steels, carbon steels, tool steels, non-alloyed steels, case-hardened steels, cast steel, tempering steels Coarse stock removal Hardened, heat-treated steels over 1,200 N/mm² (> 38 HRC) Tool steels, tempering steels, alloyed steels, cast steel Coarse stock removal Fine stock removal Rust and acid-resistant steels Stainless steel (INOX) Nonferrous metals Soft non-ferrous metals Aluminium alloys Brass, copper, zinc Hard non-ferrous metals Bronze, titanium/titanium alloys, hard aluminium alloys (high Si content) High-temperature-resistant materials Cast iron Austenitic and ferritic stainless steels Grey cast iron, white cast iron Page Catalogue 10 2 Fine stock removal Coarse stock removal Fine stock removal Coarse stock removal Coarse stock removal Fine stock removal Coarse stock removal Fine stock removal Nickel-based and cobalt-based alloys Coarse stock removal (engine and turbine construction) Fine stock removal Cast iron with flake graphite EN-GJL Coarse stock removal (GG), with nodular graphite/nodular cast iron EN-GJS (GGG), white Fine stock removal annealed cast iron EN-GJMW (GTW), black annealed cast iron EN-GJMB (GTS) ③ Cut ④ Cutting speed 1 600–900 m/min 3 PLUS 450–600 m/min 3 PLUS HC-FEP 450–750 m/min 5 450–600 m/min 3 3 PLUS 4 3 PLUS HC-FEP 5 1 3 3 PLUS 4 5 1 1 3 3 4 5 3 PLUS 4 5 1 3 PLUS 350–600 m/min 600–900 m/min 450–600 m/min 3 450–600 m/min 250–350 m/min 250–450 m/min 350–450 m/min 250–450 m/min 250–350 m/min 250–450 m/min 350–450 m/min 600–900 m/min 600–900 m/min 450–600 m/min 250–350 m/min 350–450 m/min 250–450 m/min
724 Sidor | Gäller till 12/2025 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
