PFERD Tools Main Catalogue Sida 149
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
TC burrs for high-performance applications CAST cut for cast iron a Conical shape with radius end KEL d1 d2 r Conical burr with round radius end according to DIN 8032 for machining cast iron. The cut impresses with its smooth milling performance with considerably reduced vibration and less noise. l2 l1 Special features: ■ Up to 100% higher stock removal rate on cast iron when compared with conventional cross cuts. ■ Tangibly more aggressive, large chips and very good chip removal. ■ There is reduced wear on the tool drive due to impact-free work without chatter marks, thanks to the high concentricity. 2 d1 [mm] l2 [mm] d2 [mm] l1 [mm] a [°] r [mm] Cut 70 70 14 14 2.6 2.6 CAST CAST Item no. Designation 21125283 21125284 KEL 1230/6 CAST KEL 1230/8 CAST Tungsten carbide burrs 12 30 6 8 a d1 d2 l2 l1 1 1 Conical pointed shape SKM Conical pointed burr according to DIN 8032 with flattened tip for machining cast iron. The cut impresses with its smooth milling performance with considerably reduced vibration and less noise. Special features: ■ Up to 100% higher stock removal rate on cast iron when compared with conventional cross cuts. ■ Tangibly more aggressive, large chips and very good chip removal. ■ There is reduced wear on the tool drive due to impact-free work without chatter marks, thanks to the high concentricity. d1 [mm] l2 [mm] d2 [mm] l1 [mm] a [°] Cut 6 65 26 CAST Item no. Designation 21115283 SKM 1225/6 CAST Tungsten carbide burrs 12 25 d1 Tree shape with radius end RBF d2 r 1 Tree-shaped burr with radius end according to DIN 8032 for machining cast iron. The cut impresses with its smooth milling performance with considerably reduced vibration and less noise. l2 l1 Special features: ■ Up to 100% higher stock removal rate on cast iron when compared with conventional cross cuts. ■ Tangibly more aggressive, large chips and very good chip removal. ■ There is reduced wear on the tool drive due to impact-free work without chatter marks, thanks to the high concentricity. d1 [mm] l2 [mm] d2 [mm] l1 [mm] r [mm] Cut 6 6 55 60 1.5 2.5 CAST CAST Item no. Designation 21117383 21117783 RBF 0618/6 CAST RBF 1020/6 CAST Tungsten carbide burrs 6 10 18 20 1 1 Continued on next page 60 | 2 Catalogue Discontinued product
853 Sidor | Gäller till 12/2026 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.