NIKO Product Catalog Cable Movement Systems Sida 5
Kommersiell Kunderbjudande **Toppförsäljare från NIKO Technik GmbH
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
NIKO conveyor systems for cables or hoses Control Application L c f a Power Application L c a Calculation of the Track Length (L=c+f) and number of cable trolleys CAB L E TROL LEYS AND F ES TOON SYS TEM S f The length of the track L is determined by adding the length of movement f to the closed parking distance of trolleys c (Refer to corresponding table for the dimension of the cable trolleys width). The number of cable trolleys n depends on the length of travel and on the required loop depth of cable a. The loop depth is governed by the available height between the track and any obstruction or by clients specification. Normally the loop depth is between 0,7 m to 1 m. Example: Track length L= 16 m, cable loop depth a= 0,8 m Distance between the trolleys= 2 x a = 2 x 0,8 - 1,6 m Number of the cable trolleys n = 16 m / 1,6 m = 10 trolleys, one of them being a towing trolley. The cable section depends on the necessary power supply. Large cable sections have unfavorable bending properties. In this case we recommend to distribute among multiple cables with smaller section sizes. For round cables: d min = 8 mm, d max = 60 mm (refer to table). For flat cables: (dxc) max= 200 x 50 mm (refer to table). For installations with a high speeds of motion (over 2 m per second) we recommend to use chains, in order to protect the cables. Cable Trolleys and Festoon Systems We reserve the right for technical amendments without obligation. The product pictures and drawings depicted in this catalogue do not always reflect all available sizes. Ver. March 2018 5
44 Sidor | Gäller till 12/2024 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
