Mahr - Product Catalog Sida 280
Kommersiell Kunderbjudande **Toppförsäljare från Mahr
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Millimar EHE-2048 Inductive probe EHE-2048 Millimar Electrical and Pneumatic Length Measu- ring Instruments Inductive probe FEATURES • Clutch mounted contact swivels through 280° arc for easy positioning • Involute tip (normally furnished) automatically corrects for cosine error when finger is at an angle up to 20°. Simplifies “reach over” jobs. Application: For use on test stands, surface plate work, or where light pressure is needed TECHNICAL DATA 39.6 1.56 Order no. 2120417 Product type EHE– 2048 Probe type Post bracket back, (BK– 108) tamper-proof mounted Measuring range mm ± 0.25 Measuring range inch ± .010” N 0,04 N (.14 oz.) in either direction N/mm 0,001 N / 25µm Measuring force 99.2 3.91 REF. Increase in measuring force Repeatability fw µm 0.1 Repeatability fw inch 4 µ” Linearity deviation within +/– 0,250 mm Linearity deviation within +/– .010” Cable length EAT-1026 0.1% (over full range) 0.1% (over full range) m 1.2 Compatibility Federal 8.6 .34 5.56 Ø.219 9.53mm Ø.375in Order no. 19.1 .75 2120417 ECB-1852 ACCESSORIES Order no. Product name Compatibility Product type 2216178 2216180 Stylus ø 1.6 mm/.062”, steel, l = 27.6 mm/1.085”, 1:1 ratio Stylus ø 1.6 mm/.062” involute, steel, l = 27.6 mm/1.085”, 1:1 ratio up to 20º, involute tip Stylus ø 0.787 mm/.031”, carbide, l = 27.6 mm/1.085”, 1:1 ratio Stylus ø 0.787 mm/.031”, steel, l = 27.6 mm/1.085”, 1:1 ratio Stylus ø 1.6 mm/.062”, Sapphire, l = 27.6 mm/1.085”, 1:1 ratio Stylus ø 1.6 mm/.062”, Sapphire, l = 122.8 mm/4.835”, 4:1 ratio Stylus ø 1.6 mm/.062”, Sapphire, l = 59.3 mm/2.335”, 2:1 ratio Stylus ø 1.6 mm/.062”, Sapphire, l = 154.6 mm/6.085”, 5:1 ratio Stylus ø 1.6 mm/.062”, Sapphire, l = 91.1 mm/3.585”, 4:1 ratio Adaptor to mount EHE-2048 on model 2400 stand Accessories kit for EHE-2048. Includes EAM-1071, CP-116, EPT-1013,two rectangular holding bars and a holding rod Fine adjust attachememt for EHE-2048 Clamp for mounting EHE-2048 on model 2300 stand Gagehead adapter cable. Adapts EHE-2XXX and P2XXXF gageheads to older model 432 & 230 amplifiers (5 pin round female to 8 pin square male connector) Federal Federal EPT-1004 EPT-1008 Federal Federal Federal Federal Federal Federal Federal EPT-1007 EPT-1013 EPT-1059-W1 EPT-1059-W4 EPT-1059-W2 EPT-1059-W5 EPT-1059-W3 EAM-1071 EAS-1333 EAM-1071 0.79 .031 69.9 2.75 9.53 .375 5.54 .218 EAS-1333 69.9 2.75 7.92 .312 69.9 2.75 7.92 .312 3.2 .125 4.75 .187 2216179 2216184 2216217 2185448 2216218 2185449 2216219 2208685 2208910 2210400 2206061 2211459 276 Millimar | Electrical Length Measuring Instruments Federal EAT-1026 CP-116 ECB-1852
708 Sidor | Gäller till 12/2023 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
