Mahr - Hauptkatalog Sida 382
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
MarGage 426 A Gewinde-Prüfstift EIGENSCHAFTEN • Zum Aufhängen über dem Prüfling • Satz besteht aus 3 Prüfstiften • Herstelltoleranz ± 0,5 μm • Prüfstiftlänge: 32 mm Anwendung: • Zur Bestimmung des Flankendurchmessers von Außengewinden nach der Dreidraht- Methode TECHNISCHE DATEN 378 Bestell-Nr. Type Durchmesser mm Metrisch 4821000 426 A 0,17 0,25 / 0,3 4821001 426 A 0,195 4821002 426 A 0,22 4821003 426 A 0,25 4821004 426 A 4821005 4821006 Whitworth Gänge UST Gänge je 1 Zoll je 1 Zoll mm Trapez mm Herstelltoleranz +/– µm 0,5 80 0,5 0,35 72 0,5 0,4 64 0,5 0,29 0,45 / 0,5 56 0,5 426 A 0,335 0,6 48 0,5 426 A 0,39 44 / 40 0,5 4821007 426 A 0,455 4821008 426 A 0,53 4821009 426 A 0,62 4821010 426 A 0,725 4821011 426 A 0,895 4821012 426 A 1,1 4821013 426 A 4821014 426 A 4821015 4821016 40 0,7 / 0,75 / 0,8 32 36 0,5 28 32 / 28 0,5 1 26 / 24 24 0,5 1,25 22 / 20 20 0,5 1,5 19 / 18 / 16 18 0,5 1,75 14 16 / 14 / 13 0,5 1,35 2 12 / 11 12 / 11 1,65 2,5 10 / 9 10 / 9 426 A 2,05 3 / 3,5 8/7 8/7 4 0,5 426 A 2,55 4 / 4,5 6 6 5 0,5 4821017 426 A 3,2 5 / 5,5 5 / 4,5 5 / 4,5 6 0,5 4821018 426 A 4 6 4 / 3,5 4 7 0,5 MarGage | Normale und Maßverkörperungen 0,5 3 0,5
718 Sidor | Gäller till 12/2023 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
