Lüdecke - Main Catalogue Sida 210
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Standards for Claw Couplings Claw Couplings according to DIN 3238 New seal holder embedded in coupling body Special requirements • Threads according to DIN EN ISO 228-1 and ANSI/ ASME B 1.20.1 • Claw couplings and sealing rings corresponding to this standard must have manufacturer markings! • Working pressure max. 16 bar • 100 % sight control • 100 % function check with gauge (coupling control) • Approved raw materials used only: Malleable iron: EN-GJMW-400-5(EN-JM1030) acc. to DIN EN 1562 M1-Alloy: Alloy DIN 17660-CuZn39Pb2 (2.0380) Steel: Type to be chosen by manufacturers 11SMnPb30 (1.0718) acc. to DIN EN 10087 11SMnPb30 (1.0718) acc. to DIN EN 10277-3 X5CrNi Mo 17-12-2 (1.4401) acc to. DIN EN 10088-1 G-X5CrNiMo 19-11-2 (1.4408) acc. to DIN EN 10213-4 G-X5CrNiMoNb 19-11-12 (1.4581) acc. to DIN EN 10213-4 • New seal • New seal holder - 2-way guidance Claw Couplings according to DIN 3489 Test gauge for claw couplings 210 Special requirements • Threads according to DIN EN ISO 228-1 and ANSI/ ASME B 1.20.1 • Claw couplings and sealing rings corresponding to this standard must have manufacturer markings! • Working pressure max. 10 bar • 100 % sight control required • 100 % function check with gauge (coupling control) • Approved raw materials used only: Malleable iron: EN-GJMW-400-5(EN-JM1030) acc. to DIN EN 1562 M1- Alloy: Alloy DIN 17660-CuZn39Pb2 (2.0380) Steel: Type to be chosen by manufacturer 11SMnPb30 (1.0718) acc. to DIN EN 10087 11SMnPb30 (1.0718) acc. to DIN EN 10277-3 X5CrNi Mo 17-12-2 (1.4401) acc. to DIN EN 10088-1 G-X5CrNiMo 19-11-2 (1.4408) acc. to DIN EN 10213-4 G-X5CrNiMoNb 19-11-12 (1.4581) acc. to DIN EN 10213-4
423 Sidor | Gäller till 12/2026 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
