KS Tools special tools for utility tools and transporters Sida 323
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
1 Master Compression and Tension Sleeve Set • For the assembly and disassembly of bearings • Ideally for silent bearings, hydro bearings, bushings, ball bearings, simmer rings etc. • Universal use for construction machines, truck, municipally, country and forestery technology etc. • Outstanding to use also in connection with workshop press or hollow piston cylinder • According to use application the sheaths individually can be reworked • Pressure bearing protects against increased friction during the process • In durable plastic storage case Special thread grease for puller and pusher spindles and nuts subjected high loads • Lubricant for components subjected to high static loads, e.g. threaded spindles • Prevents excessive wear and seizing • Irregularities in the surface to be protected are completely filled • Minimises the friction thanks to the closed surface • Effective protection against corrosion • Increases the service life of threaded spindles • Ensures reliable function even at high temperatures up to max. 1200°C Attention: the spindles need to be greased with a good lubricant for each application! Do not overload spindles, otherwise the thread lengthens and the pitch of the nut and spindle no longer match. The result: the nuts will seize up. Always check the applied force at the drive with a torque wrench! Maximum permitted torque: Spindle M10x1,5 60 Nm Spindle M12x1,5 100 Nm Spindle M14x1,5 180 Nm Spindle M16x1,5 250 Nm Spindle TR20x4 400 Nm Special thread grease, gun 980.1085 22 Slot bushing tool set for silent bearing slot bushes • Suitable for the installation and removal of the bearing bushes in commercial vehicle spring suspension • The slotted bushes can be effortlessly preloaded using the clamping block and the accompanying half shells and thus adjusted to the installation dimensions • Includes 12 t hydraulic cylinder, especially in the construction of fixed bushes • The hydraulic cylinder is made for universal usage • Supplied without hydraulic pump • Optional: Hand pump 640.0010 • Optional: Air Hydraulic Pump 640.0020 • Optional: Electric Hydraulic Pump 640.0030 • Special installation method that protects the bush via parallel working tensioning elements • The function of the bearing bush is retained • Simple handling and quick assembly times • Safe working • Suitable for bush change directly on the vehicle Application: Ø 51 mm - Volvo FM12 Ø 60 mm - DB / Renault (430/450/460) Ø 68 mm - MAN-TGA (140/414/460) front axle spring ROR, SAF 2 3 4 5 6 7 Special thread grease for puller and pusher spindles • Lubricant for components subjected to high static loads, e.g. threaded spindles • Prevents excessive wear and seizing • Irregularities in the surface to be protected are completely filled • Minimises the friction thanks to the closed surface • Effective protection against corrosion • Increases the service life of threaded spindles • Ensures reliable function even at high temperatures up to max. 1200°C 700.1810 46 pcs Master Compression and Tension Sleeve Set 31,20 8 9 10 consists of: 11 X 700.1701 2 Thrust bolt, M10 0,13 700.1702 2 Thrust bolt, M12 0,12 700.1703 2 Thrust bolt, M14 0,13 700.1710 1 Spindle, M10, 350 mm 0,17 700.1711 1 Spindle, M12, 350 mm 0,25 700.1712 1 Spindle, M14, 350 mm 0,35 700.1713 1 0,47 700.1800-01 1 700.1800-02 1 0,35 12 980.1090 Special thread grease, tube 5 700.1800-08 1 700.1800-09 2 Spindle, M16, 350 mm Pressure sleeve, internal Ø 74 mm, external Ø 84 mm Pressure sleeve, internal Ø 76 mm, external Ø 86 mm Pressure sleeve, internal Ø 78 mm, external Ø 88 mm Pressure sleeve, internal Ø 80 mm, external Ø 90 mm Pressure sleeve, internal Ø 82 mm, external Ø 92 mm Pressure sleeve, internal Ø 84 mm, external Ø 94 mm Pressure sleeve, internal Ø 86 mm, external Ø 96 mm Pressure sleeve, internal Ø 88 mm, external Ø 98 mm Impact adaptor for step discs 2 pcs 700.1800-10 1 Check nut M 10 0,35 700.1800-11 1 Check nut M 12 0,35 700.1800-12 1 Check nut M 14 0,35 700.1800-13 1 Stepped plate, #1 0,35 700.1800-14 1 Stepped plate, #2 0,35 460.1713 Pressure piece (removal) Ø 49x34mm 0,19 700.1800-15 1 Stepped plate, #3 0,35 460.1714 Clamping block Ø 90x54mm 3,08 700.1800-16 1 Stepped plate, #4 0,35 460.1715 Half shell set Ø 68x54mm 1,09 700.1800-17 1 Spindle TR 20, short 0,35 460.1716 Half shell set Ø 60x54mm 1,42 700.1800-18 1 0,35 460.1717 Half shell set Ø 51x54mm 1,74 700.1800-19 1 0,35 460.1718 Insertion block Ø78x35 0,52 700.1800-20 2 460.1719 Counter-bearing (assembly) Ø 78x37mm 0,51 700.1800-21 1 700.1800-22 1 700.1800-23 1 Spindle TR 20, long Thrust bolt TR 20 with bearing 2 pcs Thrust bolt big, M16 with bearing Pressure sleeve, internal Ø 90 mm, external Ø 100 mm Pressure sleeve, internal Ø 92 mm, external Ø 102 mm Pressure sleeve, internal Ø 94 mm, external Ø 104 mm Pressure sleeve, internal Ø 96 mm, external Ø 106 mm Pressure sleeve, internal Ø 98 mm, external Ø 108 mm Pressure sleeve, internal Ø 100 mm, external Ø 110 mm Pressure sleeve, internal Ø 102 mm, external Ø 112 mm Pressure sleeve, internal Ø 104 mm, external Ø 114 mm Pressure sleeve, internal Ø 106 mm, external Ø 116 mm Pressure sleeve, internal Ø 108 mm, external Ø 118 mm Pressure sleeve, internal Ø 110 mm, external Ø 120 mm Pressure sleeve, internal Ø 112 mm, external Ø 122 mm Special thread grease, gun 700.1800-03 1 700.1800-04 1 700.1800-05 1 700.1800-06 1 700.1800-07 1 700.1800-24 1 700.1800-25 1 700.1800-26 1 700.1800-27 1 700.1800-28 1 700.1800-29 1 700.1800-30 1 700.1800-31 1 700.1800-32 1 980.1085 1 0,24 0,24 0,24 0,24 0,24 0,24 0,24 0,24 Assembly sleeves for slotted silent bearings on commercial vehicles • Allows the pretensioning of slotted silent bearings on commercial vehicles • Adaptor for original dimension to intake bore size with conical sleeve • Universal solution • For use with hydraulic and / or mechanical press tools • Press the sleeve directly on the intake of the vehicle is possible • Contains a selection of the most common diameters • Polished inside wall for optimum sliding • Sturdy design • Low dimension Application: Leaf spring, stabiliser, cab suspension etc. Caution: This tool must be combined with parts of other sets (e.g. press and pull sleeve set) Recommended mounting paste: e.g. MOLYKOTE G-Rapid Plus 0,31 0,90 0,92 0,94 0,96 13 14 460.1705 19 pcs Slot bushing tool set for silent bearing slot bushes 14,90 15 consists of: 460.1706 Hydraulic cylinder 12t 6,13 460.1707 Collecting sleeve Ø90x166mm 2,60 460.1708 Supporting ring (removal) Ø 74x20mm 0,59 460.1709 Supporting ring (removal) Ø 64x20mm 0,68 460.1711 Pressure piece (removal) Ø 66x35mm 0,29 460.1712 Pressure piece (removal) Ø 59x34mm 0,24 460.1721 Counter-bearing (assembly) Ø 98x36mm 0,73 460.1722 Supporting ring (assembly) Ø 108x26mm 0,92 460.1723 Supporting ring (assembly) Ø 103x26mm 0,86 460.1724 Supporting ring (assembly) Ø 108x25mm 1,04 460.1725 Spindle (assembly) M16x2.0 L=280mm 0,52 460.1726 Spindle (removal) M16x2.0 L=195mm 0,24 16 17 18 19 20 0,98 0,99 1,00 1,03 1,05 1,06 1,10 1,10 0,02 700.1821 58 → 55 85,0 700.1823 63 → 60 85,0 700.1825 68 → 63 85,0 700.1827 72 → 68 85,0 700.1829 74 → 70 85,0 700.1831 89 → 84 85,0 e.g. silent bushes for Iveco Eurosta anti-roll bar /leaf spring e.g. silent bushes for Iveco Eurosta anti-roll bar /leaf spring e.g. Mercedes anti-roll bar for Actros, Atego e.g. MAN front axle e.g. bearings with pins, Mercedes Actros Classic e.g. bearings with pins, Mercedes Actros anti-roll bar 21 1,60 1,60 22 1,60 1,60 1,60 23 0,50 323 i
528 Sidor | Gäller till 07/2024 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.