KS Tools special tools for utility tools and transporters Sida 296
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
MNTHUEFSCHLBU Master Compression and Tension Sleeve Set • For the assembly and disassembly of bearings • Ideally for silent bearings, hydro bearings, bushings, ball bearings, simmer rings etc. • Universal use for construction machines, truck, municipally, country and forestery technology etc. • Outstanding to use also in connection with workshop press or hollow piston cylinder • According to use application the sheaths individually can be reworked • Pressure bearing protects against increased friction during the process • In durable plastic storage case Attention: the spindles need to be greased with a good lubricant for each application! Do not overload spindles, otherwise the thread lengthens and the pitch of the nut and spindle no longer match. The result: the nuts will seize up. Always check the applied force at the drive with a torque wrench! Maximum permitted torque: Spindle M10x1,5 60 Nm Spindle M12x1,5 100 Nm Spindle M14x1,5 180 Nm Spindle M16x1,5 250 Nm Spindle TR20x4 400 Nm 700.1810 46 pcs Master Compression and Tension Sleeve Set 31,20 consists of: X 700.1701 2 Thrust bolt, M10 0,13 700.1702 2 Thrust bolt, M12 0,12 700.1703 2 Thrust bolt, M14 0,13 700.1710 1 Spindle, M10, 350 mm 0,17 700.1711 1 Spindle, M12, 350 mm 0,25 700.1712 1 Spindle, M14, 350 mm 0,35 0,47 700.1713 1 Spindle, M16, 350 mm 700.1800-01 1 Pressure sleeve, internal Ø 74 mm, external Ø 84 mm 0,24 700.1800-02 1 Pressure sleeve, internal Ø 76 mm, external Ø 86 mm 0,24 700.1800-03 1 Pressure sleeve, internal Ø 78 mm, external Ø 88 mm 0,24 700.1800-04 1 Pressure sleeve, internal Ø 80 mm, external Ø 90 mm 0,24 700.1800-05 1 Pressure sleeve, internal Ø 82 mm, external Ø 92 mm 0,24 700.1800-06 1 Pressure sleeve, internal Ø 84 mm, external Ø 94 mm 0,24 700.1800-07 1 Pressure sleeve, internal Ø 86 mm, external Ø 96 mm 0,24 700.1800-08 1 Pressure sleeve, internal Ø 88 mm, external Ø 98 mm 0,24 700.1800-09 2 Impact adaptor for step discs 2 pcs 0,35 700.1800-10 1 Check nut M 10 0,35 700.1800-11 1 Check nut M 12 0,35 700.1800-12 1 Check nut M 14 0,35 700.1800-13 1 Stepped plate, #1 0,35 700.1800-14 1 Stepped plate, #2 0,35 700.1800-15 1 Stepped plate, #3 0,35 700.1800-16 1 Stepped plate, #4 0,35 700.1800-17 1 Spindle TR 20, short 0,35 700.1800-18 1 Spindle TR 20, long 0,35 700.1800-19 1 Thrust bolt TR 20 with bearing 2 pcs 0,35 700.1800-20 2 Thrust bolt big, M16 with bearing 0,31 700.1800-21 1 Pressure sleeve, internal Ø 90 mm, external Ø 100 mm 0,90 700.1800-22 1 Pressure sleeve, internal Ø 92 mm, external Ø 102 mm 0,92 700.1800-23 1 Pressure sleeve, internal Ø 94 mm, external Ø 104 mm 0,94 700.1800-24 1 Pressure sleeve, internal Ø 96 mm, external Ø 106 mm 0,96 700.1800-25 1 Pressure sleeve, internal Ø 98 mm, external Ø 108 mm 0,98 700.1800-26 1 Pressure sleeve, internal Ø 100 mm, external Ø 110 mm 0,99 700.1800-27 1 Pressure sleeve, internal Ø 102 mm, external Ø 112 mm 1,00 700.1800-28 1 Pressure sleeve, internal Ø 104 mm, external Ø 114 mm 1,03 700.1800-29 1 Pressure sleeve, internal Ø 106 mm, external Ø 116 mm 1,05 700.1800-30 1 Pressure sleeve, internal Ø 108 mm, external Ø 118 mm 1,06 700.1800-31 1 Pressure sleeve, internal Ø 110 mm, external Ø 120 mm 1,10 700.1800-32 1 Pressure sleeve, internal Ø 112 mm, external Ø 122 mm 1,10 980.1085 1 Special thread grease, gun 296 0,02 ASSEMBLY SLEEVE FOR SPRING PINS Assembly sleeves for slotted silent bearings on commercial vehicles • Allows the pretensioning of slotted silent bearings on commercial vehicles • Adaptor for original dimension to intake bore size with conical sleeve • Universal solution • For use with hydraulic and / or mechanical press tools • Press the sleeve directly on the intake of the vehicle is possible • Contains a selection of the most common diameters • Polished inside wall for optimum sliding • Sturdy design • Low dimension Application: Leaf spring, stabiliser, cab suspension etc. Caution: This tool must be combined with parts of other sets (e.g. press and pull sleeve set) Recommended mounting paste: e.g. MOLYKOTE G-Rapid Plus 700.1821 58 → 55 85,0 700.1823 63 → 60 85,0 700.1825 68 → 63 85,0 700.1827 72 → 68 85,0 700.1829 74 → 70 85,0 700.1831 89 → 84 85,0 e.g. silent bushes for Iveco Eurosta anti-roll bar /leaf spring e.g. silent bushes for Iveco Eurosta anti-roll bar /leaf spring e.g. Mercedes anti-roll bar for Actros, Atego e.g. MAN front axle e.g. bearings with pins, Mercedes Actros Classic e.g. bearings with pins, Mercedes Actros anti-roll bar consists of: 460.1706 Hydraulic cylinder 12t 6,13 460.1707 Collecting sleeve Ø90x166mm 2,60 460.1708 Supporting ring (removal) Ø 74x20mm 0,59 460.1709 Supporting ring (removal) Ø 64x20mm 0,68 460.1711 Pressure piece (removal) Ø 66x35mm 0,29 460.1712 Pressure piece (removal) Ø 59x34mm 0,24 460.1713 Pressure piece (removal) Ø 49x34mm 0,19 460.1714 Clamping block Ø 90x54mm 3,08 460.1715 Half shell set Ø 68x54mm 1,09 460.1716 Half shell set Ø 60x54mm 1,42 460.1717 Half shell set Ø 51x54mm 1,74 460.1718 Insertion block Ø78x35 0,52 460.1719 Counter-bearing (assembly) Ø 78x37mm 0,51 460.1721 Counter-bearing (assembly) Ø 98x36mm 0,73 460.1722 Supporting ring (assembly) Ø 108x26mm 0,92 460.1723 Supporting ring (assembly) Ø 103x26mm 0,86 460.1724 Supporting ring (assembly) Ø 108x25mm 1,04 460.1725 Spindle (assembly) M16x2.0 L=280mm 0,52 460.1726 Spindle (removal) M16x2.0 L=195mm 0,24 1,60 1,60 1,60 1,60 1,60 0,50 Slot bushing tool set for silent bearing slot bushes • Suitable for the installation and removal of the bearing bushes in commercial vehicle spring suspension • The slotted bushes can be effortlessly preloaded using the clamping block and the accompanying half shells and thus adjusted to the installation dimensions • Includes 12 t hydraulic cylinder, especially in the construction of fixed bushes • The hydraulic cylinder is made for universal usage • Supplied without hydraulic pump • Optional: Hand pump 640.0010 • Optional: Air Hydraulic Pump 640.0020 • Optional: Electric Hydraulic Pump 640.0030 • Special installation method that protects the bush via parallel working tensioning elements • The function of the bearing bush is retained • Simple handling and quick assembly times • Safe working • Suitable for bush change directly on the vehicle Universally press frame with hydraulic spindle • For the use in connection with the pressure and pull sleeve set 700.1700 for pressing out and pressing on of silent bearings, hydro bearings, bushings etc. • Enables de- and assembly directly on the vehicle • Through the long trailing arm also especially high housings release themselves without problem on and pressing out • Extremely robust spindle with inductively hardened thread • Special tool steel Application: Ø 51 mm - Volvo FM12 Ø 60 mm - DB / Renault (430/450/460) Ø 68 mm - MAN-TGA (140/414/460) front axle spring ROR, SAF 700.1750 6 pcs Universally press frame with hydrau9,80 lic spindle consists of: 700.1400-1 Hydraulic spindle 10 t, AG 1.1/2”x16G 460.1705 19 pcs Slot bushing tool set for silent bearing slot bushes 14,90 700.1751 1,34 Universal press frame, 5 pcs without hydraulic spindle 8,90
528 Sidor | Gäller till 07/2024 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.