KS Tools Tools for industry and trade Sida 165
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
1 2 SLIPDREHMOSCHL SLIPPER TORQUE WRENCH 3 Fixed preset ratchet torque wrench without scale with automatic trigger via slipping function – no overtightening possible. Accuracy of ±4 % Head: A highly robust 36-teeth ratchet mechanism for fastening is integrated in the powder coated ratchet head. A robust ball end mechanism guarantees the highest precision and very long lifetimes. Clear, automatic indication that the desired torque value has been achieved via ratcheting and resetting to the initial position. 4 Handle:Ergonomic handle designed for comforatble use of the scale reading 5 6 7 8 9 Two-component handle: The new light, durable and ergonomic two-component handle ensures safe and effortless working, whereby the softer component prevents the hand from slipping and provides maximum safety. Serial number:A permanent and unique serial number is applied on all torque wrenches, which provides unique product identification. 10 11 12 Corrosion: The robust and resistant light alloy body guarantees lasting corrosion protection. 13 14 15 TECHNOLOGY Ratcheting operating principle When a preset value is achieved the mechanism slips over the ball end (without the possibility of overtightening). The ratcheting torque wrench can then be used immediately again. 16 17 18 19 20 Pre-set Slipper torque wrench • Release accuracy ±4% Tolerance from the set scale value and better • Precise reading accuracy for a minimum 5.000 tightening cycles • For serial and/or conveyor assembly lines • For controlled fastening in a clockwise direction • Clearly noticeable torque release signal through ratchet • It is not possible to over tighten the set value • Automatic reset in the initial position • Without scale - with a fixed adjustable value • Long service-life and high holding times • Highest precision and reliability even under tough long-term use • Ergonomic and hand-friendly rubber handle • Square drive adaptor to DIN 3120 / ISO 1174 with ball lock • Individually marked with serial number - unique product identification • including calibration declaration of conformity according to DIN EN ISO 6789:2017(E) - traceable to national standards • Delivery includes crank adjusting key 21 22 23 24 25 26 27 28 516.5000 1/4” 1-5 0,8-4 182,5 15,5 34,3 0,22 516.5001 1/4” 4-10 3-8 182,5 15,5 34,3 0,23 516.5002 3/8” 5-20 4-19 214,0 35,0 49,5 0,48 516.5003 3/8” 15-55 11-40 323,0 39,0 58,5 1,00 516.5004 1/2” 25-125 19-93 464,0 40,0 67,3 1,85 29 30 165 i
816 Sidor | Gäller till 07/2024 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.