Hase Safety Gloves Collection - English Sida 8
Kommersiell Kunderbjudande **Toppförsäljare från Hase Safety Gloves
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
15 EN 388 - REQUIREMENTS AGAINST MECHANICAL RISKS The EN 388 standard describes the test procedures for determining the performance levels of certain mechanical risks. The pictogram is marked with five or six level values. EN 388 ABCDEF Performance levels A - abrasion resistance Level 1 - 4 Depending on thickness and coating, it is being measured how many grinding cycles it takes until the material is worn through. B - cut resistance Coupe-Test Level 1 - 5 The number of blade rotations until the glove is cut through as well as the abrasion degree of the blade is measured. C - tear resistance Level 1 - 4 The force required to tear the material of a glove to a nominal length is measured. D - puncture resistance Level 1 - 4 The force necessary to penetrate the material of a glove with a steel pin is measured. E - cut resistance ISO 13997 Level A - F This test is performed with a new blade and more pressure each time until the material is cut through or has passed the maximum test level. F - impact protection EN 13594 P = passed This test measures the energy and force transfer when a weight is dropped on the glove. Gloves without protection are not marked. 0 means not passed, level X can be used for A to E and stands for "not tested" or "not relevant" - e.g. 4243 X or 3X43 C P CUT PROTECTION TEST IN COMPARISON Representative for work with sharp and light objects MECHANICAL RISKS Representative for different, impacting force effects EN 388 Cut: rotating Cut: straight ABCDEF COUPE-TEST (EN 388:2003) ISO 13997 (EN 388:2016)
65 Sidor | Gäller till 12/2023 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
