HAAS - CATALOG 7.5 Sida 288
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Hoses and Accessories 16.13 Fillsets / Wall Hose Holder and Hose Reel OHA-Füllset "The Original" Connection between the tap and boiler to refill the water. Suitable for temperature range up to +40°C. Note: After filling a heating system, the armatures must be closed again and the hose has to be removed so that a water damage caused by a sudden occurrence of overpressure in the system and a bursting of the hose is avoided! The set consist of: 1 plastic wall hose holder, green 1 water hose "Aqua-Flex" ½", yellow, up to 15 bar operating pressure 2 half "hose fittings ¾" made of brass ► Carton content: 5 pieces in a Polybag. * Note: The hoses are suitable for industrial use, but not tested or approved for contact with drinking water! Article no. 1310 PU PU PU 1 5 100 1330 1 5 100 Colour Construction: yellow/g OHA-Füllset 2,5 m reen yellow/g OHA-Füllset 5,0 m reen OHA-Füllset with Wall-Hose-Holder, "The low cost" Connection between the tap and boiler to refill the water. Suitable for temperature range up to +40°C. Note: After filling a heating system, the armatures must be closed again and the hose has to be removed so that a water damage caused by a sudden occurrence of overpressure in the system and a bursting of the hose is avoided! The set consist of: 1 plastic wall hose holder, black 1 water hose "Aqua-Flex" ½", yellow, up to 15 bar operating pressure 2 ½" hose fittings ¾" ► Carton content: 5 pieces in a Polybag. * Note: The hoses are suitable for industrial use, but not tested or approved for contact with drinking water! Article no. 1610 PU PU 5 100 1630 100 PU Colour Construction: yellow/bl OHA-Füllset 2,5 m ack yellow/bl OHA-Füllset 5,0 m ack Aqua-Füllset The "fast" connection with the high-quality yellow water hose, on both sides equipped with the tried and tested brass plug-in system. Suitable for temperature range up to +40° C. Note: After filling a heating system the valves must be closed again and the hose disassembled so that a bursting of the hose and thus a water damage is prevented in case of sudden overpressure in the system! The set consists of: 1 plastic wall hose holder, blue 1 water hose "Aqua-Flex" ½" in yellow up to 15 bar operating pressure 2 brass tap connections with ¾" female thread for outlet valves or boiler taps item no. 2291 2 hose fittings made of brass item no. 2283 ► Carton content: 5 pieces in a Polybag. * Note: The hoses are suitable for industrial use, but not tested or approved for contact with drinking water! Article no. 1314 PU PU 5 100 1315 5 100 PU Colour Construction: yellow/bl Aqua-Füllset mit 2,5 m hose ue yellow/bl Aqua-Füllset mit 5,0 m hose ue Illustrations, dimensions and descriptions are not binding. We reserve the right to make technical changes!
373 Sidor | Gäller till 12/2024 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.