GEDORE Automotive KLANN Main catalog General Repairs Sida 91
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Wheel Bearings KL-0040-2500 Hydraulic Cylinder (17t) KL-0040-2500 Thanks to its special design as a hollow piston cylinder, the KL-0040-2500 hydraulic cylinder (17t) can be used to perform pulling as well as pushing operations in conjunction with the corresponding spindles available as accessories. Range of Use: In conjunction with various GEDORE Automotive tools, the hydraulic-cylinder (17t) KL-0040-2500 can be used for the removal and installation of drive shafts, wheel hubs, wheel bearings, silentblocs and suspension ball joints. Note: A hydraulic pump is needed to drive the hydraulic cylinder KL-0040-2500. For accessories such as coupling, hydraulic pump, pressure gauge etc., please refer to chapter 4 in this Catalogue. Technical Data: Maximum admissible force: Maximum stroke: Maximum oil pressure: Maximum volume of oil: Piston area: Thread in hollow piston: Retaining thread (pushing side): Retaining thread (pulling side): Cylinder external diameter: Cylinder overall length (piston retracted): Cylinder overall length (piston extended): Hydraulic fluid connection thread: Weight: 170kN (17t) 45mm 700bar 122cm³ 27cm² M20 2¼“-14 UNS M42x2 80mm 202mm 247mm 3/8“ NPT 5.2kg 3 KL-0040-2500 K Hydraulic Cylinder (17 t), in a Plastic Storage Case Like the KL-0040-2500, but supplied in a Plastic Storage Case. KL-0039-1003 Retaining Adaptor with O-Rings, for Hydraulic Cylinder KL-0039-1003 This adaptor is needed to retain the various KL-0039-.. and KL-0043-.. pressure/ support sleeves if these are to be used with the hydraulic cylinder KL-0040-2500. (Connection thread: M42x2) KL-0039-1005 Adaptor, Ø 35mm KL-0039-1005 The KL-0039-1005 adaptor upgrades the KL-0040-2500 GEDORE Automotive hydraulic cylinder (17t) by making it suitable also for use on the tools of the wheel bearing/silentbloc tool series having an internal retaining Ø of 35mm. For this, the KL-0039-1003 retaining adaptor is also necessary. Technical Data: External Ø: Internal Ø: Height: 35mm 20.5mm 16mm KL-0039-1002 Retaining Adaptor with O-Rings, for Clamping Nut and Pressure Spindle KL-0039-1002 This adaptor is necessary for retaining the various pressure/support sleeves of the KL-0039-.. and KL-0043-.. Series. Retaining Ø for clamping nut or pressure spindle: 20mm Copyright GEDORE Automotive GmbH, Germany formerly (91) 3.1-12
580 Sidor | Gäller till 12/2025 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.