GEDORE Automotive KLANN Main catalog General Repairs Sida 73
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
KL-0167-141 Counter-Holding Tool for Racks KL-0167-141 Suitable for racks with a Ø of 25mm, for example found in ZF power steering systems Type 7832 (974 115) on Toyota vehicles. Designed to counter-hold the rack when removing and installing the inner track rod joint. Used in conjunction with universal wrench KL-0167-15. Any standard 1/2“ ratchet or 1/2“ sliding T-Bar can be used as a holding tool. KL-0121-81 Hose Clamp Pliers 2 KL-0121-81 Universal application. Ideal for VW-Audi etc. Works on „earless“ hose clamps that are found on axle boots, radiator and fuel hoses. Technical Data: Lenght: Weight: 230mm 340g KL-0240-1 Puller for Spacer Sleeves, VW KL-0240-1 Suitable for vehicle models from 1988 onwards, such as VW Golf (II and III), Jetta, Vento, Polo, Passat, etc. When replacing steering column switches, it is necessary to firstly remove the steering wheel and then, extract the spacer sleeve from the cone of the steering column. The special design of the puller KL-0240-1 ensures that its collet chuck precisely encompasses the spacer sleeve, thus enabling quick and smooth extraction of the sleeve. Technical Data: Clamping range: 27-30mm KL-0240-2 Drive-In Mandrel for Spacer Sleeves KL-0240-2 The drive-in mandrel KL-0240-2 made of brass allows spacer sleeves to be pushed into the steering column without risk of damage. KL-0270-31 C Bit Wrench, Angled, (Reinforced Design), with 8 Bit Inserts KL-0270-31 C Suitable for Mercedes Toe Adjustment, e.g. on 190 Series (W201), C-Class (W202), C-Class (W203), 200-300 E (W124), E-Class (W210, W211), S-Class (W220). The KL-0270-31 C wrench is the ideal tool for setting the toe at the rear axle. Due to its special shape, this tool allows the user to easily and accurately turn the adjusting screw which is particularly hard to access. Technical Data: Lenght: Bit Insert: Bit Insert (height): Bit Drive: Weight: 320mm T30, T40, T45, T50, T55, XZN-8, XZN-10, XZN-12 20mm 5/16" 500g ® = reg. trademark of Acument Intellectual Properties, LLC. USA Copyright GEDORE Automotive GmbH, Germany formerly (73) 2-29
580 Sidor | Gäller till 12/2025 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.