GEDORE Automotive KLANN Main catalog General Repairs Sida 57
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
KL-0039-710 Pressing Device with Hydraulic Cylinder KL-0039-710 KL-0039-7100 Suitable for Renault Master II (1998 onwards) and Opel Movano I (1998 onwards), front axle. Used in conjunction with the hydraulic pump KL-0215-35 M25 or KL-0215-37 M25, the pressing device KL-0039-710 allows for the quick, professional and safe removal and installation of the suspension ball joints on the front upper and lower wishbone. This tool enables even heavily corroded/seized ball joints to be pushed out and replaced within just a few minutes. The removal of the upper or lower wishbone is not necessary. 2 Advantages: KL-0039-712 • Substantial time savings of approx. 1-2 hours • Quick and professional removal/installation of the suspension ball joints • Hydraulic Cylinder (17t) KL-0040-2500 can universally be used on other GEDORE Automotive tools to exert pulling or pushing force. KL-0039-722 Scope of Delivery: KL-0039-710 Pressing Device with Hydraulic Cylinder Part-No. Description KL-0039-7100 Pressing Device without Hydraulic Cylinder Qty 1 KL-0040-2500 Hydraulic Cylinder (17t) 1 KL-0039-723 Scope of Delivery: KL-0039-7100 Pressing Device without Hydraulic Cylinder Part No. Description KL-0039-1140 Press Frame (lightweight, short) Qty 1 KL-0039-1930 Pressure Spindle, M20x350, with O-Ring 1 KL-0039-1002 Retaining Adaptor with O-Rings, for Clamping Nut and Pressure Spindle 1 KL-0039-712 Sleeve Set, Renault Master II/Vauxhall/Opel Movano I 1 Scope of Delivery: KL-0039-712 Sleeve Set, Renault Master II; Opel/Vauxhall Movano I Part-No. Description KL-0039-722 Sleeve Set, Renault Master, Upper Suspension Ball Joint Qty 1 KL-0039-732 Sleeve Set, Renault Master, Lower Suspension Ball Joint 1 Scope of Delivery: KL-0039-722 Sleeve Set, Upper Suspension Ball Joint Part No. Description KL-0039-1644 Pressure/Support Sleeve, short, Ø 44mm Qty KL-0039-1764 Pressure/Support Sleeve, long, Ø 64mm 1 KL-0039-1820 Support Sleeve for Renault Master 1 KL-0039-1758 Pressure/Support Sleeve, long, Ø 58mm 1 1 Scope of Delivery: KL-0039-732 Sleeve Set, Lower Suspension Ball Joint Part-No. Description KL-0039-1821 Pressure/Support Sleeve Qty 1 KL-0039-1658 Pressure/Support Sleeve, short, Ø 58mm 1 KL-0039-1652 Pressure/Support Sleeve, short, Ø 52mm 1 KL-0039-1822 Pressure/Support Sleeve 1 Removing the upper ball joint Installing the upper ball joint KL-0711-11 L Pressing Device with Hydraulic Cylinder Removing the lower ball joint Installing the lower ball joint KL-0711-11 L Designed for Volvo S40/V40, front axle wishbone. Allows for the quick and easy removal and replacement of suspension ball joints. The ball joints can be removed and installed in situ on the vehicle within just a few minutes, without having to dismount the wishbone. This tool enables even heavily corroded/seized ball joints to be pushed out and replaced quickly and without any trouble. KL-0711-110 L Scope of Delivery: KL-0711-11 L Pressing Device with Hydr. Cyl., Volvo S40/V40 Part No. Description KL-0711-110 L Pressing Device without Hydraulic Cylinder, Volvo S40/V40 Qty 1 KL-0040-2500 Hydraulic Cylinder, 17t 1 Scope of Delivery: KL-0711-110 L Pressing Device without Hydr. Cyl., Volvo S40/V40 Part No. Description KL-0039-1140 Press Frame, short Qty 1 1 KL-0711-111 Sleeve Set, Volvo S40/V40 KL-0039-1002 Retaining Adaptor with O-Rings, for Clamping Nut and Pressure Spindle 1 KL-0039-1930 Pressure Spindle, M20x350mm, with O-Ring 1 KL-0711-111 Scope of Delivery: KL-0711-111 Set of Sleeves, Volvo S40/V40 Part No. Description KL-0711-1111 Pressure/Support Sleeve, short, Ø 38mm 1 KL-0039-1754 Pressure/Support Sleeve, long, Ø 54mm 1 KL-0039-1750 Pressure/Support Sleeve, long, Ø 50mm 1 KL-0039-1654 Pressure/Support Sleeve, short, Ø 54mm 1 Copyright GEDORE Automotive GmbH, Germany Qty formerly (57) 2-13
580 Sidor | Gäller till 12/2025 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
