GEDORE Automotive KLANN Main catalog General Repairs Sida 470
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Clutch Repairs KL-0500-4014 KL-0500-4014 Upgrade Kit (4-hole pitch) for KL-0500-40 K and KL-0500-45 K Base plate with 4-hole pitch. Required for pretensioning the clutch pressure plate before removing and installing an SAC featuring 8 bore holes. Scope of Delivery: KL-0500-4014 Upgrade Kit (4- hole pitch) for KL-0500-40 K and KL-0500-45 K Part No. KL-0500-4006 KL-0500-4006 A KL-0500-4007 KL-0500-4008 KL-0500-4009 KL-0500-4011 KL-0500-405 Description Knurled Nut Knurled Nut Threaded Bolt, M6 Threaded Bolt, M7 Threaded Bolt, M8 Base Plate, with 4-hole pitch Qty 1 1 1 1 1 1 KL-0500-405 Clutch Aligner (Patented) Suitable for Self-Adjusting Clutches (SAC). Essential tool for vehicles without a pilot bearing in the crankshaft. The newly developed clutch aligner KL-0500-405 enables clutch discs to be centred also on vehicles that do not feature a pilot bearing in the crankshaft. The two clamping-/centring elements ensure, on the first clamping element (Ø 15-28mm) the accurate centring in the clutch disc, and on the second element (Ø 12-28mm) the accurate centring in the pilot bearing, respectively the crankshaft bore. Even clutches on engines where the crankshaft bore Ø is greater than the clutch disc hub Ø can be aligned neatly and accurately thanks to this tool. Scope of Delivery: KL-0500-405 Clutch Aligner 7 Part No. KL-0500-4050 KL-0500-4057-1 KL-0500-4057-2 KL-0500-4057-3 KL-0069-0006 KL-0500-4055 KL-0500-4054 KL-0500-4056-2 KL-0500-4056-3 KL-0500-4056-4 KL-0500-4056-6 KL-0500-4056-5 7-06 (470) Copyright GEDORE Automotive GmbH, Germany Description Guide Tube (complete) Centring Pin, Ø 12mm Centring Pin, Ø 14mm Centring Pin, Ø 15mm Clamping Cone, Size 2, 22mm Cone Adaptor Set of Clamping Elements, Ø 20mm Sliding Cone, Ø 15mm, 40mm long Sliding Cone, Ø 15mm, 67mm long Sliding Cone, Ø 15mm, 75mm long Sliding Cone, Ø 18mm, 75mm long Sliding Cone, Ø 18mm, 67mm long Qty 1 1 1 1 1 1 1 1 1 1 1 1 formerly
580 Sidor | Gäller till 12/2025 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
