GEDORE Automotive KLANN Main catalog General Repairs Sida 406
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Engine Engine Timing / Valve Train, PSA (Diesel + Petrol) KL-1380-22 KA KL-1380-22 KA Locking Tool Set, Citroën/Peugeot Applicable to PSA (Citroën, Peugeot), Fiat, Nissan, Rover and TATA 1.4, 1.5, 1.7, 1.8, 1.9, 2.1, 2.2 and 2.5 litre Diesel engines as well as for the 1.0, 1.1, 1.4, 1.6, 1.8, 1.9 and 2.0 litre PSA petrol engines as installed in Citroën AX, Berlingo, BX, C15, Dispatch, Evasion, Jumper, Jumpy, Relay, Saxo, Synergie, Visa, Xanita, XM, Xsara, ZX; Peugeot 106, 205, 206, 305, 306, 307, 309, 405, 406, 605, 806, Boxer, Expert, Partner, Talbot Express; Fiat Ducato, Scudo, Ulysse; FSO Caro; LDV 200, Pilot; Nissan Micra; Rover Metro; TATA Loadbeta etc. This tool set is designed for the locking/positioning of engine shafts such as camshaft, crankshaft, injection pump shaft, balancer shaft as well as of the timing belt tensioner. It also includes a tool to adjust the timing belt tensioner. Indispensable tool kit when replacing a timing belt or performing an engine repair. Scope of Delivery: KL-1380-22 KA Locking Tool Set, Citroën/ Peugeot (Engine codes Diesel: DJ5, DKATE, TUD, VJZ, XUD; Petrol: LFW, RGX, RFU, RFW, TU, XU) 6 KL-1380-751 K Part No. KL-1380-11 KL-1380-2211 A KL-1380-2212 A KL-1380-2213 A KL-1480-13 KL-1380-2215 A KL-1380-2216 A KL-1380-2217 A KL-1380-2218 A KL-1380-2219 A KL-1380-2220 A KL-1480-12 KL-1380-2222 A KL-1380-2223 A KL-1480-11 KL-1480-18 KL-1380-2226 A KL-1480-10 KL-1380-2228 A KL-1382-1 KL-1380-2230 A KL-1380-2290 A Description Locking Pin for Injection Pump, Ø 9.5mm Locking Pin for Injection Pump,Ø 6.0mm Locking Pin for Balancer Shaft, Ø 5.9mm Locking Pin for Injection Pump, Ø 4.9mm Locking Pin for camshaft, M8, Ø 6.7mm Locking Pin for flywheel (angled), Ø 7.7mm Locking Pin for Flywheel (angled), Ø 7.9mm Locking Pin for Cankshaft/Camshaft, Ø 10mm Locking Pin for Camshaft, Ø 8.4/6.5mm Locking Pin for Camshaft, Ø 7.9mm Locking Pin, Ø 7.9mm Locking Pin for Camshaft, Ø 6.0mm Locking Pin, Ø 9.9mm Locking Pin for Crankshaft, Ø 10/8mm Locking Pin for Flywheel (angled), Ø 6.0mm Hex Screw, M8x40mm Retaining Pin for Tensioner Pulley, Ø 1.5mm Locking Pin for Auxiliary Belt (angled), Ø 6.8mm Retaining Pin for Tensioner Pulley, Ø 3.0mm Adjustment Tool for Timing Belt Tensioner, 7mm, square Adjustment Tool for Timing Belt Tensioner, 8mm, square Plastic Storage Case Qty 1 1 2 1 1 1 1 1 2 2 1 2 1 1 1 3 1 1 1 1 1 1 KL-1380-751 K Locking Tool Set, PSA Applicable to PSA (Citroën, Peugeot) and Fiat 1.0, 1.1, 1.4 and 1.6 litre petrol engines as found in: Peugeot 106, 1007, 206, 207, 306, 307, 308, Bipper, Partner; Citroën Berlingo, C2, C3, C4, Nemo, Saxo, Xsara; Fiat Fiorino, Qubo. Designed for the locking/positioning of camshafts, crankshaft, timing belt- and auxiliary drive belt (V-ribbed belt) tensioners, and flywheel. The kit also includes a tool for retaining the timing belt on the crankshaft sprocket. An indispensable tool set when replacing a timing belt or performing an engine repair. Scope of Delivery: KL-1380-751 K Locking Tool Set, PSA (Engine codes: CDY, CDZ, HDZ, HFV, HFX, HFY, HFZ, KFR, KFS, KFT, KFU, KFV, NFT, NFW, NFX, NFZ, ET3J4, ET3JP4, TU1A, TU1JP, TU1JP/L4, TU1M+, TU3A, TU3JP, TU3JP/L4, TU3JP/IFL4, TU5J2, TU5J4, TU5J4/L3, TU5J4/L4, TU5JP, TU5JP/L3, TU5JP/L4, TU5JP4, TU5JP4B, TU5JP4S, TU5JP4/L3, TU5JP4/L4, TU9M, TU9M/L, TU9M/L3) 6.6-78 (406) Copyright GEDORE Automotive GmbH, Germany Part No. KL-1380-2603 KL-1380-2481 KL-0180-3030 KL-0680-2202 A KL-1380-2217 A KL-1380-2219 A KL-1380-2220 A KL-1380-2222 A KL-1380-2228 A KL-1380-2230 A KL-1380-237 A KL-1380-2801 A KL-1381-3021 KL-1480-11 KL-1480-12 KL-4990-2001 KL-4990-1107 Description Locking Pin (angled), Ø 4mm Locking Pin (angled), Ø 4.9mm Locking Pin, Ø 3mm Locking Pin, Ø 4.5mm Locking Pin, Ø 10mm Locking Pin, Ø 7.9mm Locking Pin, Ø 7.9mm Locking Pin, Ø 9.9mm Retaining Pin for Tensioner Pulley Adjustment Tool for Timing Belt Tensioner, 8mm Retaining Clip for Timing Belt Locking Pin (angled) Locking Pin (angled), Ø 4.2mm Locking Pin (angled), Ø 6mm Locking Pin (short), Ø 6mm Plastic Storage Box Plastic Storage Case Qty 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 formerly
580 Sidor | Gäller till 12/2025 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.