GEDORE Automotive KLANN Main catalog General Repairs Sida 343
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Engine Timing / Valve Train, VW-Audi (Diesel + Petrol) KL-0282-31 Reaction Wrench (420mm long, adjustable) KL-0282-31 Suitable for use on perforated timing belt sprockets with a hole Ø not smaller than 12mm, as found in VW-Audi, Seat, Fiat, Ford, Opel/Vauxhall, Peugeot, Renault, Citroën, Rover, Volvo, Isuzu, Japanese vehicles, etc. With interchangeable pins and different hole pitches. Designed to prevent timing belt sprockets on camshafts, injection pumps, etc. from rotating; for example, when loosening the central fastening screw. Due to the different pin Ø and hole pitches, this wrench is almost universal in its range of application. Technical Data: Pitch between pins: Pin Ø: Pin height: Overall tool length: 45-75mm 12mm and 16mm 61mm 420mm KL-0282-35 B Reaction Wrench Set (470mm long, adjustable) KL-0282-35 B Universally suitable for use on perforated timing belt sprockets with a hole Ø not smaller than 6.5mm as found in: VW-Audi, Seat, Škoda, Alfa, Fiat, Lancia, Dacia, MG, Nissan, Ford, Opel/Vauxhall, Peugeot, Renault, Citroën, Rover, Volvo, Suzuki, Isuzu, Japanese vehicles, etc. Designed to prevent timing belt sprockets on camshafts, injection pumps, etc. from rotating, for example, when loosening/tightening the central fastening bolt. Thanks to the different interchangeable pins and the adjustable lever allowing for variable adjustments to hole diameters and pitches, this tool is nearly universally applicable. Scope of Delivery: KL-0282-35 B Reaction Wrench Set (470mm long, adjustable) Part No. KL-0282-35 KL-0282-311 KL-0282-312 KL-0282-313 Description Reaction Wrench (adjustable) Set of Pins, Ø 18mm Set of Pins, Ø 7.5mm Set of Pins, Ø 6mm Qty 1 1 1 1 Technical Data: Pitch between pins: Pin Ø: Pin height: Overall tool length: from 14mm to 130mm 6mm, 7.5mm, 12mm, 18mm 25mm/42mm 470mm KL-0284-10 Adjustment Tool for Timing Belt Tensioner KL-0284-10 Technical Data: Drive: Length: Depth: Ø Weight: Suitable for VW-Audi engines. Designed to be used for adjusting the tension of the timing belt. The tool can be operated from a variety of angles - depending on the space available. KL-0284-91 A Adjustment Tool for Timing Belt Tensioner, VW-Audi, Seat, Škoda Applicable to VW-Audi, Seat, Škoda 1.6, 1.9 and 2.0 litre petrol and Diesel engines. Designed to be used for adjusting the tension of the timing belt. The adjustable multi-position head of the tool allows the tensioner pulley to be operated even in confined spaces. Copyright GEDORE Automotive GmbH, Germany 3/8" or by a mandrel 47mm 32.5mm 4.0/6.0mm 70g KL-0284-91 A (Engine codes: AAC, AEG, AEH, AGR, AHF, AKL, AKS, ALH, ALZ, APF, APK, AQY, ASV, ASY, ASZ, ATD, ATM, AVQ, AVU, AWA, AWF, AWG, AXA, AXB, AXC, AXR, AXW, AXX, AYD, AZG, AZH, AZJ, AZL, AZM, AZV, BDK, BEH, BFQ, BFS, BGB, BGU, BHD, BHZ, BJB, BKC, BKD, BKP, BLR, BLB, BLR, BLS, BLT, BLX, BLY, BMA, BMB, BMM, BMN, BMP, BMR, BMT, BNA, BPG, BPJ, BPY, BRD, BRE, BRF, BRM, BRT, BRU, BSE, BSF, BSU, BSX, BUL, BUZ, BVA, BVE, BVF, BVG, BVH, BVX, BVY, BVZ, BWA, BWA1, BWE, BWJ, BWT, BXE, BYD, BYK, BZC, CCSA, CDLA, CDLB, CDLC, CDLD, CDLF, CDMA, CHGA, CMXA) formerly (343) 6.6-15 6
580 Sidor | Gäller till 12/2025 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.