GEDORE Automotive KLANN Main catalog General Repairs Sida 278
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Engine Injection System, PSA KL-1383-11 KA KL-1383-11 KA Injector Nozzle Puller Set, PSA 2.0 HDi + 2.2 HDi Applicable to PSA 2.0 (110bhp, 135bhp) [DW10] and 2.2 [DW12] HDI TwinCam engines as found in Citroën, Ford, Fiat, Jaguar, Lancia, Peugeot, Suzuki, Volvo etc. This really useful tool set allows for the professional removal of very tight-fitting/ stuck injector nozzles, without the need for dismounting the cylinder head. The KL-1383-11 KA injector nozzle puller set is designed for the accurate extraction of very tight-fitting injector nozzles, as well as for the cleaning of the injector nozzle bore and seal seat. The removal of the cylinder head is not necessary. The extraction bridge is specifically designed for the above mentioned vehicles in order to ensure safe and accurate support of the puller tools, even if injectors are stuck or seized in place. The special pull spindle with additional union nut (to be used on DW10 engines) will facilitate the extraction of even the most stubborn injectors. The injector nozzle needs to be opened for this. (engines: DW10) Note: Be sure to read and observe the injector nozzle manufacturer’s directions and specifications before attempting to re-install an injector nozzle that had been opened. If necessary, have the injector nozzle tested and checked by an authorized workshop. Procedure for Injector Nozzle Removal: Unscrew injector nozzle head by means of the special socket included in the set. (DW10): Screw pull spindle into injector, and, if using the pull spindle with union nut, additionally screw union nut onto injector nozzle. Place pre-assembled base tool onto cylinder head and screw on shoulder nut. Extract injector nozzle by evenly turning shoulder nut. Inject compressed air into the combustion chamber in order to prevent impurities from entering the latter. Scope of Delivery: KL-1383-11 KA Injector Nozzle Puller Set, PSA 2.0 HDi + 2.2 HDi Part No. KL-1383-118 KL-1383-119 KL-1383-104 KL-0369-55 B KL-1383-110 KA KL-1383-1119 6 Description Compressed Air Adaptor for Glow Plug Bore M8x1 Cleaning Tool for Injector Nozzle Seat Cleaning Tool for Injector Nozzle Seat Compressed Air Adaptor for Glow Plug Bore M10x1 Injector Nozzle Puller Set, Peugeot/Citroën 2.0 HDi + 2.2 HDi Plastic Storage Case Qty 1 1 1 1 1 1 Scope of Delivery: KL-1383-110 KA Injector Nozzle Puller Set, Peugeot/Citroën 2.0 HDi + 2.2 HDi Part No. KL-1383-1111 KL-1383-1112 KL-1383-1113 KL-1383-1114 KL-1383-1115 KL-1383-1116 KL-1383-1131 KL-1383-1001 KL-1383-1021 KL-1383-1022 KL-0369-4505 A KL-0369-4606 A KL-0369-461 A KL-1283-1016 KL-0014-0030 KL-0126-221 KL-1383-1119 6.4-33 (278) Copyright GEDORE Automotive GmbH, Germany Description Base Plate with Axial Bearing Shoulder Nut, M16x1.5 Pull Spindle, M14x1.5, 132mm long Centring Bolt, Ø 6.8mm Support Bolt, Ø 8.9mm Support Bolt, Ø 16x89.5mm Brace Support Bolt, Ø 16x73.5mm Supporting Plate Pull Spindle, M25x1, 132mm long Special Socket, size (waf) 25mm, 1/2" drive Special Bit Insert, size (waf)10mm Pull Spindle, M17x1, with Union Nut M27x1 Special Socket, Size (waf) 29mm, 1/2“ drive Cheese Head Screw, M8x30mm Molybdenum Disulphide Paste 50g Flexible Magnetic Lifter Plastic Storage Case Qty 1 1 1 2 2 1 2 1 1 1 1 1 1 4 1 1 1 formerly
580 Sidor | Gäller till 12/2025 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.