GEDORE Automotive KLANN Main catalog General Repairs Sida 242
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Engine Cylinder Head / Engine Block KL-0379-10 KL-0379-10 Bolts for Subframe, Smart Applicable to Smart Fortwo (450). The bolts are used to secure the subframe against further dropping when the latter needs to be lowered. Necessary when performing work on the engine, e.g. on starter motors, turbochargers etc. Once the subframe has been supported (for example by means of a transmission jack) the original bolts can be replaced with our KL-0379-10 - bolts for subframe. This will enable the safe and correct lowering of the subframe by approx. 20cm. Scope of Delivery: KL-0379-10 Bolts for Subframe, Smart Part No. KL-0379-1001 KL-0379-1002 KL-0379-1003 KL-0181-80 Description Bolt (Length 300mm) Bolt (Length 260mm) Washer, Ø 12mm Qty 2 2 4 KL-0181-80 Guide Sleeve Puller Allows guide sleeves to be pulled out and knocked in without incurring any damage. The puller works on the principle of an internal collet chuck. In engine and gearbox engineering, so-called guide sleeves are used for the accurate fixing of the housing halves. These guide sleeves, however, should not be installed or removed with tongs or a hammer. Scope of Delivery: KL-0181-80 Guide Sleeve Puller Part No. KL-0181-800 KL-0181-8005 KL-0181-8006 KL-0181-8007 KL-0181-8008 KL-0181-8009 KL-0181-8010 6 KL-0178-21 K Description Slide Hammer Puller Collet Chuck for internal Ø of 5mm Collet Chuck for internal Ø of 6mm Collet Chuck for internal Ø of 7mm Collet Chuck for internal Ø of 8mm Collet Chuck for internal Ø of 9mm Collet Chuck for internal Ø of 10mm Qty 1 1 1 1 1 1 1 KL-0178-21 K Seal Ring Installation Kit Applicable to virtually all VW-Audi engines. This tool enables the quick and professional installation of sealing rings on the crankshaft and camshaft without the need for dismantling the engine. Scope of Delivery: KL-0178-21 K Seal Ring Installation Kit Part No. KL-0178-211 KL-0178-2120 KL-0178-2121 KL-0178-2122 KL-0178-2123 KL-0178-2124 KL-0178-2131 KL-0178-2132 KL-0178-2133 KL-0178-2141 KL-0178-2142 KL-0178-2143 KL-0178-2144 KL-0178-2145 KL-0178-2190 6.3-11 (242) Copyright GEDORE Automotive GmbH, Germany Description Housing Guide Sleeve, Ø 10.5mm Guide Sleeve, Ø 12.5mm Guide Sleeve, Ø 14.5mm Guide Sleeve, Ø 16.5mm Guide Sleeve, Ø 18.5mm Pressure Ring, Ø 32mm Pressure Ring, Ø 35mm Pressure Ring, Ø 37mm Conical Sleeve, Ø 32mm Conical Sleeve, Ø 35mm Conical Sleeve, Ø 35mm Conical Sleeve, Ø 35mm Conical Sleeve, Ø 37mm Plastic Storage Case Qty 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 formerly
580 Sidor | Gäller till 12/2025 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
