GEDORE Automotive KLANN Main catalog General Repairs Sida 159
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
KL-0174-556 Adaptor, 2 1/4"-14 UNS to M68x2 Required to use a hydraulic cylinder having an M68x2 retaining thread as a drive for the GEDORE Automotive Hydraulic Tool Sets. Technical Data: External thread: Internal thread: KL-0174-556 Retaining thread for tool set Retaining thread for hydraulic cylinder 2¼“-14 UNS M68x2 Note: The external thread 2 1/4“-14 UNS, measured on the tool set, has an internal Ø of 55.15mm. The internal thread M60x2 measured on the hydraulic cylinder to be screwed in, has an external Ø of 68mm. KL-0174-558 Adaptor, 2 1/4"-14 UNS to M55x2 Compatible with the Gedore wheel hub puller for HGV 1.62. This adaptor is needed to use the 17t hydraulic cylinder KL-0040-2500 in conjunction with pressure spindle KL-0039-1930 and pressure piece KL-0039-1935 as a drive for the Gedore wheel hub puller for HGV 1.62 (Code 8026030). Even severely stuck/seized wheel hubs are no longer an issue using the KL-0040-2500 17t hydraulic cylinder. KL-0174-558 Retaining thread for tool set Retaining thread for hydraulic cylinder 4 KL-0174-559 Adaptor, 2 1/4"-14 UNS to 2 1/4"-14 UNS This adaptor is needed to operate the hydraulic cylinder KL-0040-2500 when the perforated puller plates (size 2 and size 3) having a pitch circle diameter of 90-102mm from the KL-0174-.. Series are to be used. KL-0174-559 Retaining thread for tool set Retaining thread for hydraulic cylinder Technical Data: External thread: Internal thread: 2¼“-14 UNS 2¼“-14 UNS Note: Other dimensions available upon request. KL-0174-561 Adaptor, 2 1/4"-16 UN to 2 1/4"-14 UNS This tool is necessary if the hydraulic cylinder KL-0040-2500 is to be used as a drive for a tool set having a 2¼"-16 UN retaining thread. Technical Data: External thread: Internal thread: KL-0174-561 Retaining thread for tool set Retaining thread for hydraulic cylinder 2¼"-16 UN 2¼"-14 UNS Note: The external thread 2¼"-16 UN measured on the tool set, features an internal Ø of 55.15mm. The internal thread 2¼"-14 UNS measured on the hydraulic cylinder to be screwed in, features an external Ø of 56.95mm. KL-0174-562 Adaptor, 2 3/4"-16 UN to 2 1/4"-14 UNS KL-0174-562 This tool is required if the 17t hydraulic cylinder KL-0040-2500 or the 10t hydraulic cylinder KL-0040-2200 are to be used as a drive for press frame KL-1000-01 . External Thread: Internal Thread: Retaining thread for tool set Retaining thread for hydraulic cylinder Technical Data: 2¾"-16 UN 2¼"-14 UNS Note: The external thread 2¾"-16 UN measured on the tool set, has an internal Ø of 68.25mm. The internal thread 2¼"-14 UNS measured on the hydraulic cylinder to be screwed in, features an external Ø of 56.95mm. Copyright GEDORE Automotive GmbH, Germany formerly (159) 4-23
580 Sidor | Gäller till 12/2025 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
