GEDORE Automotive KLANN Main catalog General Repairs Sida 120
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Axle Repairs Wheel Hubs KL-0045-7 Hydraulic Spindle (12t), M42x2 KL-0045-7 The KL-0045-7 is a hydraulic spindle with a maximum allowable force of 120kN (=12t) designed to fit a wide range of GEDORE Automotive tools. Scope of Delivery: KL-0045-7 Hydraulic Spindle (12t), M42x2 Part No. KL-0045-700 KL-0045-7009 KL-0045-7020 Description Hydraulic Spindle (12t, Base Tool), M42x2 Pressure Piece, short Pressure Piece, long Qty 1 1 1 3 KL-0040-2500 The base tool KL-0045-700 consist of a body made of high-grade steel, two internal pistons, cup seals and various screw joints. The spindle is operated via a pressure screw. If the hydraulic spindle KL-0045-7 is combined with tools of the KL-0174-Series, the adaptor KL-0174-552 (2¼"-14 UNS to M42x2) is additionally needed when the perforated puller plates size 2 and size 3 are used. Technical Data: Maximum admissible force: Maximum stroke: Thread of cylinder: Length without ‘T’ Handle: Weight: 120kN (12t) 16mm M42x2 240mm 2.3kg KL-0040-2500 Hydraulic Cylinder, 17t Thanks to its special design as a hollow piston cylinder, the KL-0040-2500 hydraulic cylinder (17t) can be used to perform pulling as well as pushing operations in conjunction with the corresponding spindles available as accessories. Technical Data: Range of Use: In conjunction with various GEDORE Automotive tools, the hydraulic cylinder (17t) KL-0040-2500 can be used for the removal and installation of drive shafts, wheel hubs, wheel bearings, silentblocs and suspension ball joints. Note: A hydraulic pump is needed to drive the hydraulic cylinder KL-0040-2500. For accessories such as coupling, hydraulic pump, pressure gauge etc., please refer to chapter 4 in this Catalogue). KL-0039-1930 Maximum admissible force: Maximum stroke: Maximum oil pressure: Maximum volume of oil: Piston area: Thread in hollow piston: Retaining thread (pushing side): Retaining thread (pulling side): Cylinder external diameter: Cylinder overall length (piston retracted): Cylinder overall length (piston extended): Hydraulic fluid connection thread: Weight: 170kN (17t) 45mm 700bar 122cm³ 27cm² M20 2¼“-14 UNS M42x2 80mm 202mm 247mm 3/8“ NPT 5.2kg KL-0039-1930 Pressure Spindle with O-Ring, M20x350 Technical Data: Pin Ø: Overall length: Maximum load capacity: KL-0039-1935 20mm 350mm 20t KL-0039-1935 Thrust Piece This tool is necessary for pressing out drive shafts. It is used in conjunction with the KL-0174-.. Puller Series, the KL-0040-2500 hydraulic cylinder and the KL-0039-1930 pressure spindle with pin Ø 20mm. KL-0174-856 KL-0174-856 Thrust Piece for Drive Shafts Designed to press out drive shafts. Used in conjunction with the tools of the KL-0174-.. Series and mechanical pressure spindles with a pin Ø of 14mm. 3.4-07 (120) Copyright GEDORE Automotive GmbH, Germany formerly
580 Sidor | Gäller till 12/2025 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.