GEDORE Automotive KLANN Car Specialty Tools Catalogue Sida 79
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
4.3 Fuel System (Code 1902164) KL-0122-701 Fuel Filter Socket, Ø 109mm KL-0122-701 Suitable for the Peugeot, Citroën, Fiat, Lancia, Suzuki vehicles equipped with either a 2.0 or 2.2 HDI Diesel engine such as: Peugeot 206, 307, 406, 607, 807; Citroën C5, C8, Berlingo, Jumpy, Xsara; Fiat Scudo, Ulysse; Lancia Phedra, Zeta; Suzuki Vitara, Grand Vitara I. This fuel filter socket is intended for the removal and installation of the fuel filter cap when replacing a fuel filter cartridge. Recommended Accessory: 3093 U-20 Reversible Ratchet, 3/8" Technical Data: Profile: Drive (square): Ø 109mm 3/8" (Code 2800713) KL-0122-702 Fuel Filter Socket, Ø 82mm KL-0122-702 Suitable for Volvo Diesel vehicles equipped with fuel filter cartridge such as S60, S80, V70, XC70, XC 90, with 2.4 D or 2.4 D5 engines. This fuel filter socket is intended for the removal and installation of the fuel filter cap when replacing a fuel filter cartridge. Recommended Accessory: 3093 U-20 Reversible Ratchet, 3/8" Technical Data: Drive: Internal Ø: Ribs: 3/8" 82mm 6 ribs (Code 3087573) KL-0122-703 Fuel Filter Socket, Ø 115mm, Ford Transit KL-0122-703 Applicable to fuel filter housings (Ford No. 1 781 617), as fitted to Ford Transit Custom (from 2012 onwards), Tourneo Custom (from 2012 onwards), Transit (2006-2014) and Transit (from 2014 onwards). Required when changing the fuel filter cartridge. The compact design of the socket allows the fuel filter cap to be loosened and tightened with ease, even on vehicles where space is at a premium. Recommended Accessory: 1993 U-20 Reversible Ratchet 1/2" Technical Data: Drive: Inner diameter: Grooves: 1/2" 115mm 6 Grooves (Code 2922819) KL-0289-10 Fuel Filter Cap Installation Tool KL-0289-10 Suitable for the VW-Audi, Seat and Škoda Diesel vehicles fitted with a UFI fuel filter unit. Very useful tool allowing for the torsion-free mounting of fuel filter caps on fuel filters; required, for example, after changing the fuel filter cartridge. The fuel filter cap installation tool is designed to press the fuel filter cap evenly and in a torsion-free manner into the seal seat in the fuel filter housing. Then, the fuel filter can be fixed according to the manufacturer’s instructions. Note: If a fuel filter cap is inserted into the seal seat in the fuel filter housing without the use of our special tool but by means of the fixing bolts, there is a risk that the fuel filter cap is subjected to torsional stress during installation which could lead to leakage in the fuel filter unit. Copyright GEDORE Automotive GmbH, Germany 79
220 Sidor | Gäller till 12/2025 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.