Ganter Norm Standard Parts - Catalogue Sida 1868
Kommersiell Kunderbjudande **Toppförsäljare från Ganter Norm
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
GN 1414 Telescopic Slides 3.2 3.1 with Full Extension and Dampened Self-Retracting Mechanism, Load Capacity up to 360 N F With rubber stop, locking device in retracted position, detach function 3.3 2 Type 3 Identification no. Mounting with through-holes 3.5 3.4 1 Stroke 300 350 400 450 250 320 375 450 550 670 775 900 F S per pair in N at 10,000 cycles at 100,000 cycles 260 260 310 360 140 140 190 240 Specification • l1 Slide profile Steel, zinc plated, blue passivated 4 ZB l2 +3 −3 l3 F S per pair in N Stroke 500 550 600 650 500 550 600 650 1000 1100 1200 1300 at 10,000 cycles at 100,000 cycles 360 310 310 260 240 190 190 140 Information Telescopic slides GN 1414 are installed vertically and in pairs. The stroke reaches ≈ 100 % of the nominal length l1 (full extension). The rubber stops of type F dampen the impact of the slide in the end positions. This feature minimizes noise development and increases the lifespan. If larger static or dynamic loads occur in the direction of extension, they should be absorbed by external stop elements. • Bearings Roller bearing steel, hardened • Ball cage, outer slide Plastic • Ball cage, inner slide Steel, zinc plated • Rubber stop and detach function Plastic / Elastomer The telescopic slides are delivered in pairs. They can be installed on the extension on either the left or right side due to the mechanics. All mounting holes are easy to reach through auxiliary holes. Only the mounting holes are shown, but other production-related holes may be present. • Self-retracting mechanism, dampened Steel / Plastic see also... • Technical Information on Telescopic Slides Page 1898 ff. • Operating temperature -20 °C to 100 °C • • RoHS Telescopic Slides GN 1424 (with Dampened Self-Retracting Mechanism) Page 1878 • Telescopic Slides GN 1410 (with Full Extension) Page 1861 On request • Other lengths and hole spacing • Other attachment options • Other surfaces How to order 1 2 3 4 GN 1414 -650-B-1-ZB 1 l1 2 Type 3 Identification no. 4 Finish 3.8 Adjusting, Moving with Guides, Spindles and Ball Rollers | Page 1867 3.7 l3 3.8 l2 3.9 l1 1 +3 −3 3.6 1
2210 Sidor | Gäller till 12/2026 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
