fischer facade systems catalogue Sida 105
Kommersiell Kunderbjudande **Toppförsäljare från Fischer
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Basics · undercut anchors Earthquake-proof façade systems. The FZP II also proves its worth in situations with the highest demands on the fixing system. Earthquake tests in Shanghai, China, impressively confirmed the outstanding performance of the undercut anchor. The various façade materials mounted with the FZP II withstood accelerations of up to 9.5 m/s2. This corresponds to forces that cause considerable damage and destruction even in modern buildings designed for earthquakes. These results have been confirmed by repeated tests in Italy and France. 6 Various anchor types and installation methods. There are two different installation methods for the fischer Zykon panel anchor FZP II: Flush installation For flush installation, the installed anchor is flush with the back of the panel. The back of the panel is used as a reference for the constant drill hole depth. Flush installation of a fischer Zykon panel anchor FZP II. Calibrated front level of the subframe konst. konst. Stand-off installation Thanks to the stand-off installation, the panel thickness tolerances that occur with natural stone panels can can be compensated. With this type of installation the the constant distance between the bottom of the drill hole and the front side of the panel, the remaining wall thickness (RWD), are used as the reference dimension. As a result, the drill hole depth becomes variable. Thanks to the use of the stand-off anchors the panel thickness tolerances can thus be compensated. This type of fixing is used, for example, for façade panels with panel thickness tolerances. hv1 hv2 RWD Panel thickness tolerance is compensated by adjusted drill hole depth Visible façade (panel front side) Stand-off installation of a fischer Zykon panel anchor FZP II SO. 105
122 Sidor | Gäller till 12/2025 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
