fischer ETICS-Fixings EWI catalogue Sida 18
Kommersiell Kunderbjudande **Toppförsäljare från Fischer
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
The universal ETICS screw fixing with Delta-Seal coated steel screw Polystyrene rigid foam boards O35 on perforated sand-lime brick Additional reinforcement of ETICS BUILDING MATERIALS APPROVALS ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ Screw fixings termoz 8 U Building material classes A, B, C, E Concrete Building brick Solid sand-lime brick Hollow blocks made from lightweight concrete Vertically perforated brick Perforated sand-lime brick Solid blocks made from lightweight concrete Aerated concrete ADVANTAGES APPLICATIONS FUNCTIONING ▪ High retention forces thanks to the screwing process and embedment depth of 70 mm. ▪ High level of corrosion protection of the screw thanks to Delta-Seal coating. ▪ An air gap is produced above the screw head due to the sealing ball. This reduces heat transmission losses. ▪ The flexible head compensates for any heat-related tension and prevents damage. ▪ Can be combined with the insulating discs DT 90, DT 110 and DT 140 for very soft insulating materials. ▪ For insulating material thicknesses up to 320 mm. ▪ Attachment of ETICS insulating boards on concrete and masonry ▪ Flush-to-surface installation in ETICS insulating materials and mineral wool e.g. polystyrene ▪ The fixing is set in pushthrough installation. ▪ The setting tool Termoz SWZ TX 30 is required for installation. ▪ Simple, fast setting by screwing the Delta-Seal coated screw in using a standard screwdriver. ▪ Non-load-bearing layers such as adhesive and old plaster are included in the maximum useful length. 3 15
71 Sidor | Gäller till 12/2025 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
