Eurotec catalogue fastening technology Sida 16
Kommersiell Kunderbjudande **Toppförsäljare från Eurotec
Deck construction and landscaping Processing instructions Terrace Substructure a properly executed substructure is of great importance for a stable and durable wooden terrace. on the one hand, it has the task of supporting the actual decking, so that a flat surface is maintained even under a heavy load. on the other hand, it serves as the constructive protection of wood by creating a distance between the ground and decking/wooden supports. The wood is thus neither exposed to waterlogging or increased wood moisture in the ground-air zone. Waterlogging and increased moisture content coupled with the use of unsuitable wood species would create a breeding ground for wooddestroying organisms. In the following, we would like to show you various approaches to the construction of a terrace substructure. a supporting ground is required. This can be compacted soil or gravel as mentioned before. This is where the foundation rests on. The support timbers are laid on these. The foundations create the above mentioned necessary distance between soil and wood and remove the emerging loads. Here are three examples for the installation of substructures 1 2 1 a strip foundation is poured into concrete. This is very expensive and requires very accurate work. 2 Concrete elements are laid in a gravel bed. These are relatively difficult to transport and position. In the versions 1. and 2. a problem becomes clear: You have to work very precisely to bring the top edges of the foundations to exactly the same height. Since this is usually not possible, the supporting joints must be later relined. The Rolfi spacers (p. 36 - 37) are particularly suitable for this. 3 3 16 Adjustable pedestals by Eurotec The adjustable pedestals can be placed directly on compacted ground or on concrete. The time-consuming construction of the foundations and the relining of the substructure wood for height adjustment. The height can be infinitely adjusted together with the supporting joint, which is connected by a bracket directly to the adjustable pedestal.
444 Sidor | Gäller till 12/2024 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.